Wideband in the H pipe?

[robvas]

Can you stick a wideband O2 in one of the downstream O2 bungs in an off-road H or X pipe?

Seems like it would work, but wasn't sure if there was something I was missing.

 

[01yellercobra]

It'll work. But most wideband instructions tell you to put it within a certain distance of the collector to get the best reading. I imagine there's a time difference to think about between the collector and rear O2 bung. That being said, I've done it with no noticeable issues.

 

[Black Gold 380R]

My Holley Terminator instructions say the sensor should be between 1 and 10 inches after the header collector AND you must have no less than 18 to 24 inches of exhaust pipe after the sensor.

Not saying in the H pipe won't work, just letting you know what the experts say.

Sent from my SM-G950U using the svtperformance.com mobile app

 

[robvas]

It’s a BBK pipe and long tubes, will have to get under there and measure

 

[gt347mustang]

It'll be fine

 

[decipha]

no problem

Heres a note about mounting it on the top side of the pipe-
Pre Tune Information / EFIDynoTuning