WTB: Oil cooler to block adapter (03-04 Cobra)

[dutch]

WTB: Oil cooler to block adapter

Cracked one of the holes overtightening the oil pressure sensor, so I'm looking for a new adapter. It seems all 96-04 cobra's used the same part, just the cooler is different. I only need the adapter.
Seller must be willing to ship to Europe, which isn't difficult or scary at all, just letting you know.

Here's a picture of the piece:

Let me know what you got, it would REALLY help me out!

Thanks!

 

[dutch]

bump

 

[1997Cobra]

Any welders around? You could probably have it welded, and buy a npt tap and clean the threads up.. It'll probably save you a few bucks..

I can try to spec out the actual thread size asap

 

[TheSinner]

Thread size is 1/4"-18 NPT. Just got a new oil feed fitting.

OP, I have an adapter plate and cooler I'm looking to get rid of. What service do people usually use to ship out your way?

 

[TheSinner]

From a 1999 Cobra, if you're positive the plate will work on your application.

 

[dutch]

A member just sent me one, thanks for all the responses guys. Welding didn't seem to be a good idea, since it's cast aluminium, would always be a weak point.