I have for sale a cog supercharger pulley set-up. I had this for my Vortech set up on a 1991 5.0 Mustang. They are both made out of aluminum. They have some dings from being installed, uninstalled, moved from a couple of houses, stored in the garage, etc. The cog/belt ride surfaces are fine with no issues. All of the marks and dings are on the outer surfaces mainly on the upper. The lower only has the one ding photoed on the very edge of the 1 cog tooth which the belt should be no where near once installed and is very minor. I'm pretty particular about my items so these are over scrutinized and photographed so the new owner can get a feel of exactly what they will be receiving. The two belts are a free gift. The larger length belt is marked with the Goodyear Logo while the other belt has had the markings worn off.
Cog setups are the real deal with no slipping and high rpm speed. This setup cost an arm and a leg when new. I'm looking for $260 plus shipping via USPS Priority with tracking. Insurance is available to the buyer. I have feedback here and have just shy of 1000 positive feedbacks on eBay under rupbre27. I can do USPS money order or Paypal. Gift no charge or regular merchandise payment +3.5%.
Upper Pulley
27 Tooth
Width 31mm
.785" Shaft Diameter
Anodized Anuminum
Lower Pulley
74 Tooth
Width 41mm
Accessory Drive Pulley Approx 4.5"
Bolt Pattern Approx 2.36" Bolt Centers Side to Side
Bolt Pattern Approx 3.250" Bolt Centers Diagonally
Anodized Aluminum
Photos:
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Cog setups are the real deal with no slipping and high rpm speed. This setup cost an arm and a leg when new. I'm looking for $260 plus shipping via USPS Priority with tracking. Insurance is available to the buyer. I have feedback here and have just shy of 1000 positive feedbacks on eBay under rupbre27. I can do USPS money order or Paypal. Gift no charge or regular merchandise payment +3.5%.
Upper Pulley
27 Tooth
Width 31mm
.785" Shaft Diameter
Anodized Anuminum
Lower Pulley
74 Tooth
Width 41mm
Accessory Drive Pulley Approx 4.5"
Bolt Pattern Approx 2.36" Bolt Centers Side to Side
Bolt Pattern Approx 3.250" Bolt Centers Diagonally
Anodized Aluminum
Photos:
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
