I am looking to trade my 97 cobra for a 5.0. I am done with this car. It has a knock in the motor that no one can find. It was 5000 miles on the new motor with the knock. The knock is in the top of the motor. Car runs and drives fine. Car is fully built. Has the following done.
Engine:
4.6L bored .20 over.
Manley h-beam rods
J.E. SRP 80 pistons 8.5.1 comp (all cylinders just tested 2 weeks ago were putting out 155.)
Forged 8 bolt crank
BBK long-tube headers
MAC o/r prochamber
Flowmaster super 44's
Built b-heads Fully port and plolished
SHM stage-2 blower cams
Professional products FPR
42lb FRPP injectors
Aeromotive 340lph in-tank pump
Vortech s-trim on 10lb's
Sniper 105mm big air MAF
MSD coil packs
Transmission:
Tremec t-45 with 5000 miles on it. Came out of a 2001 cobra and had sycos replaced.
Centerforce dual friction clutch
Steeda tri-ax shifter
F1 stage 1 lightened flywheel
FRPP aluminum driveshaft
4.10 gears on stock rear.
Suspension:
Tockico HP blue shocks all around
Tockico HP blue lowering springs all the way around.
Steeda 30mm rear sway bar
Steeda upper and lower controler arms (needs new ones they don't like boost to much)
Blue oval subframe connectors
Mac camber and caster plates
Crossed drilled and slotted rotors all around
Hawk HPS brake pads all around
Tires:
Needs fronts tires
Rear tires are Nitto 555 with 80% tread left.
They are on 18" 95 cobra r's
Paint is in good shape clear is peeling in a small spot on the rear bumper.
I know i am missing alot of other stuff to. I also have a ton of spare parts to go with it. To much parts to list.
I am looking for a sn95 5.0 in good shape with a superchager or turbo. If not a nice n/a one would be fine to.
video
[/URL][/IMG]
Engine:
4.6L bored .20 over.
Manley h-beam rods
J.E. SRP 80 pistons 8.5.1 comp (all cylinders just tested 2 weeks ago were putting out 155.)
Forged 8 bolt crank
BBK long-tube headers
MAC o/r prochamber
Flowmaster super 44's
Built b-heads Fully port and plolished
SHM stage-2 blower cams
Professional products FPR
42lb FRPP injectors
Aeromotive 340lph in-tank pump
Vortech s-trim on 10lb's
Sniper 105mm big air MAF
MSD coil packs
Transmission:
Tremec t-45 with 5000 miles on it. Came out of a 2001 cobra and had sycos replaced.
Centerforce dual friction clutch
Steeda tri-ax shifter
F1 stage 1 lightened flywheel
FRPP aluminum driveshaft
4.10 gears on stock rear.
Suspension:
Tockico HP blue shocks all around
Tockico HP blue lowering springs all the way around.
Steeda 30mm rear sway bar
Steeda upper and lower controler arms (needs new ones they don't like boost to much)
Blue oval subframe connectors
Mac camber and caster plates
Crossed drilled and slotted rotors all around
Hawk HPS brake pads all around
Tires:
Needs fronts tires
Rear tires are Nitto 555 with 80% tread left.
They are on 18" 95 cobra r's
Paint is in good shape clear is peeling in a small spot on the rear bumper.
I know i am missing alot of other stuff to. I also have a ton of spare parts to go with it. To much parts to list.
I am looking for a sn95 5.0 in good shape with a superchager or turbo. If not a nice n/a one would be fine to.
video
Last edited:
