/ Register

  • Welcome to SVTPerformance!

WTT: IRS for solid axle

Discussion in 'Florida' started by Wicked46, Mar 2, 2011.

  1. Mar 2, 2011 #1
    Wicked46

    Wicked46 Under Pressure Established Member

    Messages:
    3,175
    Joined:
    Nov 6, 2006
    Location:
    Palm Bay, FL
    I want to swap my IRS for a Solid axle (preferable built). My IRS is complete from rotor to rotor. It has a BF IRS brace, all new Maximum Motorsports polly bushings, Magnaflow polished cat-back with Flowmasters welded in and MM race springs. The IRS has only 24k miles on it and there is NOTHING at all wrong with it.

    I'm looking for a complete solid axle swap (brakes, springs, exhaust etc..). If you have a built solid, i'll do an even swap. If you have a stock solid, i'll need a few bucks towards the swap. Let me know what you have. I'm located in Melbourne/Palm Bay
     
  2. Mar 2, 2011 #2
    Grant Theft Auto

    Grant Theft Auto I hit deer. Established Member

    Messages:
    3,435
    Joined:
    Sep 11, 2009
    Location:
    Florida
    not sure if otownpj still wants IRS for his wifes mach 1 but you should send him a PM
     
  3. Mar 2, 2011 #3
    saleen2002

    saleen2002 New Member Established Member

    Messages:
    249
    Joined:
    Jan 27, 2009
    Location:
    Pittsburg, CA
    man if you were closer.....i just posted up lookin for an irs
     
  4. Mar 2, 2011 #4
    Stew197

    Stew197 New Member Established Member

    Messages:
    18
    Joined:
    Feb 24, 2011
    Location:
    Alton bay,NH
    i got a gt rear end with new carrier and pinion bearings 4:10s installed right now have a set of new 3.73's and have frpp upper controls arms aftermarket springs new abs sensors stock shocks
     
  5. Mar 3, 2011 #5
    Wicked46

    Wicked46 Under Pressure Established Member

    Messages:
    3,175
    Joined:
    Nov 6, 2006
    Location:
    Palm Bay, FL
    Sounds good... I'd need to put axles in it and I need a cat-back.
     
  6. Mar 3, 2011 #6
    Stew197

    Stew197 New Member Established Member

    Messages:
    18
    Joined:
    Feb 24, 2011
    Location:
    Alton bay,NH
    well it has axles and a slp loudmouth catback just the stock axles
     
  7. Mar 4, 2011 #7
    Wicked46

    Wicked46 Under Pressure Established Member

    Messages:
    3,175
    Joined:
    Nov 6, 2006
    Location:
    Palm Bay, FL
    Yeah, thats what I mean.... I'd have to upgrade the axles and put a cover on the back. I'm interested but i'd need a few bucks towards the swap. My IRS has all Poly bushings, billetflow IRS brace, a polished cat back and H&R springs.... PM me if you want to work something out!
     
  8. Mar 4, 2011 #8
    otownpj

    otownpj Member Established Member

    Messages:
    476
    Joined:
    Apr 21, 2010
    Location:
    orlando
    i might be interested in a swap for my 99gt 8.8 w/ 3.73's, stock axles though. I will have to think about it.
     

Share This Page