NGK TR6 out of box gap size

[How2003cobra]

can you double up the feeler gauge to get the gap size

NGK TR6 out of box gap size

Just a reminder for anyone changing their plugs in their pullied Cobra. Make sure and double check the gap, even when closing it, with fresh NGK TR6 plugs. I used a wire style tool when I first installed them, to what I thought was .035 gap. Got spark blowout when accelerating on the highway, so...

www.svtperformance.com

 

[03' White Snake]

can you double up the feeler gauge to get the gap size

Yes. You add up the different thickness feeler gauges to get the value you are after. Might take 3 or 4 of them to get the value you are after.

 

[How2003cobra]

One last question for a stock pulley no upgrade what size should I gap

 

[robvas]

I put fresh plugs in mine about 1,500 miles ago. Gaped them at .030 with a feeler guage well this week on my way home from work at 5:30am I decided to make a little pull in 3rd. At aroud 5,500 it acts like it has a rev limiter. Any idea?

Does it rev fine at say, 1/2 throttle? I would guess you have a bad coil (or two). If you have a straight-through exhaust you can hear it misfiring.

 

[03cobra#694]

can you double up the feeler gauge to get the gap size

NGK TR6 out of box gap size

Just a reminder for anyone changing their plugs in their pullied Cobra. Make sure and double check the gap, even when closing it, with fresh NGK TR6 plugs. I used a wire style tool when I first installed them, to what I thought was .035 gap. Got spark blowout when accelerating on the highway, so...

www.svtperformance.com

Did you happen to see how old that thread you bumped was?

 

[How2003cobra]

Did you happen to see how old that thread you bumped was?

and

 

[vr4]

Did you happen to see how old that thread you bumped was?

and

ahh. another short timer in the house

 

[03cobra#694]

and

Read #12 of this.

The World according to Stampede! SVTP rule explanation.

SVTP Rules in Stampede's/laymans terms. 1. Be respectful, no flaming except in Smack down. IE: SD is there for a reason, if you have issues with someone or a post take it there. In all other sections flaming and/or name calling is not allowed. Examples when someone post something you don't...

www.svtperformance.com

 

[How2003cobra]

OK

 

[01yellercobra]

Stock everything=stock gap.