What are the torq specs for bolting the flywheel to the crank and the clutch to the flywheel.
Sep 13, 2006 #1 B black01mustang a new z06 will be mine Established Member Joined Mar 22, 2005 Messages 1,096 Location richardson,TX What are the torq specs for bolting the flywheel to the crank and the clutch to the flywheel.
Sep 13, 2006 #2 J JB beautiful loser Established Member Joined Jun 30, 2002 Messages 9,666 Location Michigan Tighten the pressure plate bolts in two stages: Stage 1: Tighten the bolts to 45 Nm (33 lb-ft) Stage 2: Tighten the bolts an additional 60 degrees 85 Nm (63 lb-ft) for flywheel use cross-bolting pattern (like you would/should do lugnuts) on both pressure plate and flywheel these are from Ford service manual aftermarket items may specify differently Last edited: Sep 13, 2006
Tighten the pressure plate bolts in two stages: Stage 1: Tighten the bolts to 45 Nm (33 lb-ft) Stage 2: Tighten the bolts an additional 60 degrees 85 Nm (63 lb-ft) for flywheel use cross-bolting pattern (like you would/should do lugnuts) on both pressure plate and flywheel these are from Ford service manual aftermarket items may specify differently
Sep 13, 2006 #3 B black01mustang a new z06 will be mine Established Member Joined Mar 22, 2005 Messages 1,096 Location richardson,TX Alright thx, the aftermarket parts say use stock specifications.
Sep 13, 2006 #4 J JB beautiful loser Established Member Joined Jun 30, 2002 Messages 9,666 Location Michigan you're welcome! when I'm not making smartass or dickhead posts, I actually like to help people :-D Last edited: Sep 13, 2006
Sep 13, 2006 #5 B black01mustang a new z06 will be mine Established Member Joined Mar 22, 2005 Messages 1,096 Location richardson,TX Ya I hear you