Uncommon set up

[angel23]

Last summer I purchased a used 03 cobra from a dealer and I have been trying to piece together information on the vehicle. I reached out to the shop that did the install/ tune and am waiting to see if they can come up with any information.
Looking for a ball park dyno number for the setup which to me seemed different from what most people are running. Looking to raise the boost and get retuned, but the car drives great for what is done currently.

Steggy stage 4 port
Comp cams (either stage 2 or 3)
ARH longtubes and catless x
Magnaflow catback
Injectors
Accufab throttle body and plenum
3.0 upper/ 2# lower
Tuned by well know mustang shop in northeast

Didn’t understand why the previous owner upgraded cams/ added longtubes but kept a very mild pulley set up.
Any idea what this car is putting down?

 

[01yellercobra]

I wouldn't consider that too mild personally. By not maxing out the blower it keeps heat in check.

High 400's to low 500's depending on timing would be my guess. But I suck at that stuff.

 

[CobraBob]

With a good tune, it's probably up around 510whp. If you're looking for more (serious) power, save for a blower swap (Whipple). JMO.