BBR now offers NITROUS EXPRESS packages

SteveG@Lethal

Active Member
Established Member
Joined
Jun 17, 2011
Messages
3,145
Location
Florida
With the huge increase in sales and popularity with Nitrous, we decided to help you the consumer out and set up different stages. From the basic to a full on go set up for your 2011-2014 Mustang GT/ BOSS!!

As many know, our customer/svtp member just went a 10.29 @ 130 on a basic set up with a 150 wet shot NX plate system

You can order these systems online or over the phone. If you place the order online or browsing, you can add or subtract items to each stage as you choose.

Stage 1

2011-14 Mustang GT / Boss BBR / Nitrous Express Stage 1 Kit




Includes:
*Nitrous Express Plate System ( 35-200 HP )
*Blow-By Racing Custom Tune using SCT

$699.99 plus shipping




Stage 2

2011-14 Mustang GT / Boss BBR / Nitrous Express Stage 2 Kit



Includes:
*Nitrous Express Plate System ( 35-200 HP )
*Blow-By Racing Custom Tune using SCT
*NXG 1 degree Colder Spark Plugs
*Accessory Package:
-Bottle Heater
-Bottle Gauge
-Fuel pressure Safety Switch
-NHRA Blow Down Tube Fitting
-Blow Down Tube
-Nitrous Purge Kit

$1174.95 plus shipping




Stage 3

2011-14 Mustang GT / Boss BBR / Nitrous Express Stage 3 Kit



Includes:
*Nitrous Express Plate System ( 35-200 HP )
*Blow-By Racing Custom Tune using SCT
*NGK 1 degree colder Spark Plugs
*NX DIGITAL RPM WINDOW SWITCH - No RPM chips required
*Accessory Package:
-Bottle Heater
-Bottle Gauge
-Fuel pressure Safety Switch
-NHRA Blow Down Tube Fitting
-Blow Down Tube
-Nitrous Purge Kit

$1329.95 plus shipping





Stage 4

2011-14 Mustang GT / Boss BBR / Nitrous Express Stage 4 Kit



Includes:
*Nitrous Express Plate System ( 35-200 HP )
*Blow-By Racing Custom Tune using SCT
*NGK 1 degree colder Spark Plugs
*NX DIGITAL RPM WINDOW SWITCH - No RPM chips required
*Accessory Package:
-Bottle Heater
-Bottle Gauge
-Fuel pressure Safety Switch
-NHRA Blow Down Tube Fitting
-Blow Down Tube
-Nitrous Purge Kit
*Stainless Steel Off-Road X-pipe

$1549.95 plus shipping





Stage 5


2011-14 Mustang GT / Boss BBR / Nitrous Express Stage 5 Kit



*Nitrous Express Plate System ( 35-200 HP )
*Blow-By Racing Custom Tune using SCT
*NGK 1 degree colder Spark Plugs
*NX DIGITAL RPM WINDOW SWITCH - No RPM chips required
*Accessory Package:
-Bottle Heater
-Bottle Gauge
-Fuel pressure Safety Switch
-NHRA Blow Down Tube Fitting
-Blow Down Tube
-Nitrous Purge Kit
*Pypes Long Tube Headers with Off-Road X-pipe

$1989.99 plus shipping




Any questions, PM or shoot us a call

561-417-5555
 

9secWS6

New Member
Established Member
Joined
Apr 30, 2013
Messages
278
Location
South Carolina
what power did you make and how much are you spraying and while im asking could you post pics of the setup..:beer:
sorry for the million questions
I honestly haven't dynoed it (which is sad because I have a dyno at my disposal). I am spraying 150hp @950-1000psi bottle pressure
539695_10200198133973671_636992187_n.jpg


59733_10200198134493684_939619605_n.jpg


155708_10200198147174001_1815156848_n.jpg


547450_10200198167054498_1222096334_n.jpg
 
Last edited:

NinjaBum

Active Member
Established Member
Joined
May 14, 2011
Messages
2,016
Location
Albuquerque, NM
So with a window switch you ever need to worry about popping your intake manifold like you see some folks doing?

I am pretty clueless when it comes to nitrous, which has always kept me away from it
 

NitrousExpress

New Member
Established Member
Joined
Jun 15, 2010
Messages
1,172
Location
Wichita Falls, Texas
Yes it will help prevent that. You technically want to stay out of nitrous under around 3000 rpms, and you want to avoid tagging the rev limiter with nitrous on. The window switch eliminates both those problems.
-Garrett
 

4VFTW

Well-Known Member
Established Member
Joined
Jan 16, 2013
Messages
1,843
Location
South Florida
I predict you will be getting a call from me in the future for a Stage II/III kit Steve. Its just too good/cheap to resist.
 

SteveG@Lethal

Active Member
Established Member
Joined
Jun 17, 2011
Messages
3,145
Location
Florida
We are working on dry kits as well as with E85. Will not release that until we have perfected it.

Wet kits with E85 are no problem though.
 

corysmach1

Active Member
Established Member
Joined
Mar 22, 2004
Messages
4,386
Location
Circleville, Ohio
Ok cool I will wait untill you have either wet or dry perfected on E85. I would actually prefer wet....but didnt know how many you guys had done on E85.
 

Users who are viewing this thread



Top