FS: Posi Ported Eaton and matched VMP elbow

[VNMOUS1]

Have one more; the same setup that was part of running mid-10's in my GT500.
This one's fresh....hasn't been run since ported by Posi.

Includes a port matched VMP elbow and then add your choice of a 2.59" VMP stock look pulley or the quick change hub so you can use a 2.5, 2.75 or 3.0!

$1,000 plus shipping.
Does not include pulley.

Thanks!

bj

 

[cobrav8281]

What stage port? Pics?

 

[VNMOUS1]

It's a Posi so no "stage "

I'll get pic up tomorrow.

Sent from my MB855 using Tapatalk

 

[VNMOUS1]

bump for pic

 

[VNMOUS1]

Ttt

 

[VNMOUS1]

TTT for new price. $900 plus ship. Your choice of pulley is additional.


bj

 

[sprintstang]

I plan on getting this exact set up with my stock blower being sent to posi

 

[Catmonkey]

Any idea of how much power you were making with this setup? Would this bolt onto a 2012 GT500 without any issues?

 

[VNMOUS1]

Buy this, keep yours; )

Sent via Tapatalk from my MoPho

 

[Corepuncher]

Would you consider selling any of the following items separately:

VMP Elbow
2.59 Pulley + Idler (do you have idler?)

Just checking before I go and buy new, thanks!

 

[VNMOUS1]

I plan on getting this exact set up with my stock blower being sent to posi

You can get 3-ish from your stock one and sell it in a hurry. 4 if you are patient.

Any idea of how much power you were making with this setup? Would this bolt onto a 2012 GT500 without any issues?

This one has never been on a car, but I ran one identical to it with a IW 10%, JLT 113 and Cobra Jet 63mm and ran mid 10s on it. With stock fuel delivery. Dyno? Beats me, my car dyno'd like crap. It said 560 if that means anything. Had a 2.6" on it.

Would you consider selling any of the following items separately:

VMP Elbow
2.59 Pulley + Idler (do you have idler?)

Just checking before I go and buy new, thanks!

The elbow is port matched to that blower. Doesn't come with an idler. an come with a stock look 2.59 or for a little more dough, we'll put on a quick change hub with your choice of a 2.5, 2.75 or a 3.0

But no, can't separate.

bj

 

[VNMOUS1]

Any idea of how much power you were making with this setup? Would this bolt onto a 2012 GT500 without any issues?

Yes it will fit a '12 with no problems.

bj