i'm lookin to get a posi port pretty soon with a port matched plenum and SBTB. i want to run a 4lb lower with a 2.76 upper. if i get a BAP will the stock injectors be able to handle that or will i have to get injectors too?
getting a port and have (fuel delivery) questions
- Thread starter i8urSS
- Start date
Close enough to get 60+.
Moved and retitled.
I would plan on needing if you don't already have it, a BAP w/wire upgrade.
Even though injectors are easiest to change with the blower off, I would data log duty cycle first and see if you end up needing them.
Some do, some don't.
I would plan on needing if you don't already have it, a BAP w/wire upgrade.
Even though injectors are easiest to change with the blower off, I would data log duty cycle first and see if you end up needing them.
Some do, some don't.
Last edited:
Users who are viewing this thread
