What does your Terminator idle at, after warmed up?

[Jomo1994z71]

Guys,
Just curious what your Terminator idles at after warm up with accessories off or on (list them, such as A/C, lights, radio, etc)...not sure if it's called closed or open loop?

I feel mine idles high lately (gas mileage sucks), and it used to idle around 850rpms, I thought...

 

[Tims97SVT]

Mine is set at 950.

 

[boosted2000si]

Mine idles around 1k with all accessorys off. Once I click the AC on it drops down to 850 and stays around that.

 

[03sm3341]

About 950 on mine.

 

[gabe1530]

950-1000 then with AC on it goes to 850-900

 

[Chuy]

Went warmed up, mine idles around 850-920.

 

[Jomo1994z71]

Went warmed up, mine idles around 850-920.

A/C off?

 

[EvilBlack]

850

 

[Jimmysidecarr]

Normally what ever I set it at.

Lately however it's been around 1k to 1100, but considering the fan and a/c are continuously blasting away lately I have just left it in the interest of allowing the charging to keep up.

I never had an issue with the 3.2 metco alt pulley and staying charged up before but it has never been this hot for so long either.

I may just unhook the battery to start the PCM learning strategy over again.

 

[SVTDice]

About 975 or so. Or 1k. Depends if I have the A/C on or not.

 

[03cobra#694]

 

[kezell]

With A/C on....about 870, A/C off 970.

I would like to get it a tad lower but the Brisk plugs do not like anything lower than what its at.

 

[MoKo_03SVT]

i have mine set to idle at 950 (in my tune/with my handheld)

 

[Stalker27]

At 1k here. Ac on drops slightly below that. Bassani catback sounds goooood idling at 1k!!

 

[Brutal Metal]

Not a Terminator (YET) but 750 with accessories off! The cams sound TOUGHER!

 

[04screamingvert]

About 750 -800 just did a 2.93 pulley change with a 93 oct tune from Bama.

 

[DSGWhippedSnake]

mines about 900-950 ish

 

[Alb Cobra]

about 820-850

 

[04cobra408]

mine idles nice with cams at 900-1000rpm

 

[Zimm11]

1000 now...

900 like a month ago...confused as to why it changed to be honest...