Another Little Fox Coupe Project Ive been working on.

[91svtcoupe]

If you haven't seen my post over on SEFB here is another little project Ive been working on:

This car is some what "Rare" Color Combo (not the Foxbody Coupe itself, but the color combo)

8L Sand Beige
LX 5.0 Sedan (P40E): 47

So a quick run down on the car. Previous owner of the car had given it in the last 9 months a 90% Complete Restoration.

Few Parts he added:

Ford Racing Crate Engine
New sve clutch, sve flywheel, fork, cable, everybolt is new.
New z spec trans, FRPP aluminum Drive shaft

All bolts are arp or grade 8 bolts.
power steering pump,
brake booster, master cylinder, rack,
waterpump, oem ford distributer,
3g alt conversion with wire,
new pa mini starter and wires, new battery, battery wires + and -,
every bolt is new for everything including acceseries.
New FRPP blue hoses
prothane trans mount and crossmember bushings.
Exhaust is new from front to back
pypes stainless steel headers, pypes x pipe, and flowmaster all Stainless steel american thunder cat back system.
New nos Ford headlights
New nos Ford taillights
Carlite quarter windows
weather stripping, headliner, carpet, upholstry, ford racing black floor mats, black sunvisors........etc. you get the picture

Few Before Photos and During:

Then I got a hold of it..........................:read:

 

[91svtcoupe]

When I went to pick it up:

after I got it home I took a few pictures and then changed out the front seats

Heres the seats I put in:

 

[91svtcoupe]

Now all kinds of stuff has happened.........

New (used) Spec 3+ Clutch

Cleaned the rear end

Painted the rear end

Unsure of this flywheel but it was on the white car.

Phase 1 Almost Complete

I took out all the stock suspension:

Installed: Rear

Max Motorsport Weight Jacker Rear Lower Control Arms
Hoticks Upper Adjustable Control Arms
Stock 8.8 Rear End Housing
Moser 5 lug 28 Spline Axles
3:73 Motorsport Gears
MAC 8.8 Girdle
Strange Adjustable Shocks

Front:
UPR Tubular K Member
UPR Tubular A Arms
Strange Adjustable Struts
QA1 Coil Overs and 300lb 14" Springs
Saleen Race Craft 2" Drop Spindles
13" Cobra Front Brakes with Crossed Drilled Rotors
Max Motorsport CC Plates


Pulled the Drived Drain and Sold it My motor is almost ready to go back in

Next Phase I guess will be Scott Rod Fab Panels Installed

Off with the Dog House, Getting ready for Engine bay work.

Also Hid Wires.

Few updates on my Little Sand Beige Coupe.......

I used the Scott Rod Panels

Marked the area off for grinding, so we would have a nice solid weld. For those wandering we only found it necessary to clearance the small spot you see with the paint missing in the next photo. Mark only had to hammer it in some, no 5lb hammer stuff just minor. Other than that the fit was Great. I do know that I tried them on the white car before it left and found out that on an Air Bag car the front of the Scott Rod Aprons will have to be trimmed.....

Painted the Scott Rod Panels with some primer on the back...should help with Rust........

Hood awaiting Paint:

Welding away:

Passenger Side was fun........It will have the Hole cut for the Power Pipe....very hard to determine with out the engine.

The hole looks kinda of large but with the trim we have to go around it. I think it will be just fine. Also welded up the Top of the Radiator support for a clean look.

and my new choice for wheels have been ordered.

 

[Red Turtle]

Wow, dude you are a machine with these builds!! I thought the CCW's looked amazing on the car.

 

[bleedingfordblu]

looks great! but i feel like it needs the ccw's

 

[QuickV8]

didnt like it with the first stock rims but looks good with the last 2 rim selections.

 

[Terminator-Fox]

Jesus. Cool car

 

[MTBSully]

very nice build sir. Keep it up

 

[timspony]

Bad A$$....Do like!!!! :beer:

 

[AluminatorSnake]

What seats are those?

 

[brucesvt]

sweet build, love the wheels

 

[SonicBlur2003]

epper:

 

[91svtcoupe]

Wow, dude you are a machine with these builds!! I thought the CCW's looked amazing on the car.

Thanks, Im thinking I will hold on to the CCW's just for good measure.

looks great! but i feel like it needs the ccw's

Thanks

very nice build sir. Keep it up

Thanks

What seats are those?

Corbeau GTII in Black Leather...Not sure if someone covered them or they are Factory Covered with out the Corbeau stitched in.

sweet build, love the wheels

The CCW's or the GT500?

 

[SilvGT]

very nice!

 

[95riosnake]

I'm not sure why but I freaking love that color!

 

[SLVRBLT]

Nice work so far!

I agree, it needs the CCW's.

 

[91svtcoupe]

I'm not sure why but I freaking love that color!

yea me too........its either a love hate relationship......lol

Nice work so far!

I agree, it needs the CCW's.

well Ive had the CCW's for so long I think Im tired of looking at them.

 

[sn94cobra]

Very nice

 

[SLVRBLT]

well Ive had the CCW's for so long I think Im tired of looking at them.

For some reason the new wheels are too new (if that makes sense) for this car. I like the classic (pun intended) look of them on this car.

 

[COBRAGUY95]

Man sweet build!