Van@RevanRacing
Active Member
Modification List to 2007 Shelby GT500 in Alloy Metallic:
• Cooling System
Revan Racing/C&R Racing Radiator (New), Revan Racing/C&R Dual Fan Heat Exchanger, Revan Racing/Shelby Black Anodized Reservoir Kit
This is the car that I developed the Shelby Cooling System on.
• Items Removed
o A/C Delete
o Radio Delete
o Each could be reinstalled if necessary
• Suspension: Griggs Racing GR40 TT Suspension
o Front Chassis
o K-Member Front Cradle, S197
o Solid Modular Motor Mount set
o SLA Lower Control Arm Set, adjustable, severe duty
o SLA Tower Set S197
o S197 Lower Steering Shaft
o Bump Steer Kit with Aluminum Drop Spindle
o Drop Spindle, Alum. Kit w/S-197 hubs
o GR40 Steering Rack
o GT500 Power Steering Cooler
o GR40 Steering Rack Plumbing GT500
o SLA Upper Control Arm Street Set
o F1 Anti Roll Bar Kit, Front Adjustable Zero Bind
o SFCO 8-1000 Springs, C/O 2.5" x 8" x 1000
o SLA Yellow 30 Series Front SLA Shock Kit w/Coil-Overs
o 1 MDS 2500 A5 Cooling Duct/ABS Pick-Up Mount, Drop Spindle
o Brake Caliper Bracket Kit
o 3” ARP Wheel Studs
o Rear Chassis
o Watts Link System with Watts Link T/A Cover
o Torque Arm
o Double Adjustable Lower Control Arms
o Control Arm Relocation Brackets
o 315 Kit (For use with 10.5” wide rims and 315 or wider tires)
o Koni Coilover Shocks with Street Valving
o SRCO Coilover Springs
o Rear Anti-Roll Bar
o ARP 3” Wheel Studs
o Rear Differential Catch Can
• Braking
o Stock Brembo 4 Piston Brakes
o dba 5000 Series 2-piece Slotted Rotors (Cryogenically Treated)
o Stock Single Piston Rear Brakes
o dba 4000 Series 1-piece slotted Rotors with Steeda Brake relocation kit
o Hawk DTC 70 Racing Brake Pads Front
o Hawk DTC 60 Racing Brake Pads Rear
o Brembo LCF 600 Plus Racing Brake Fluid
o Full Brake Duct Kit
• Wheels and Tires
o Forgeline ZX3R 18” x 10.5” Matte Black Titanium Bolts Hoosier R6 Tires 315’s on all four corners
o Stock GT500 Rims 18” x 9.5” with Hoosier R6 Tires 295’s as spare set
o Stock GT500 Rims 18” x 9.5” with Goodyear Supercar Tires 285/40’s
• Engine
o Engine Built by L&M Engines (Built October 2010. Less than 200 Miles)
o Ford GT WS Aluminum Block assembled with ARP 2000 Hardware This is the FORD GT Aluminum Block that Ford has discontinued.
o Ford GT Cams Degreed
o 9.5:1 Compression
o Diamond/L&M Custom Pistons with Valve Relief
o AP Rings Hand Filed
o Oliver Billet I Beam Rods with ARP 2000 Rod Bolts
o Manley Titanium Valve Spring Retainers
o Ferrea Super Alloy Exhaust and Intake Valves
o Speed Pro Main and Rod Bearings
o Canton Road Race Oil Pan
o Thump Racing Billet Aluminum Belt Tensioner
o NGK TR6 Spark Plugs
o Kenne Bell 3.6 Liter Liquid Cooled Supercharger Stage 3 Kit Extra Pulleys
o Tuner is SCT XCAL 3
o Ford Racing 80LB Injectors
o Fore Precision Black Anodized Evolution Performance Fuel Rails
o Kenne Bell Competition Boost A Pump for Fuel Delivery
o PCV Catch Can System
• Transmission
o Factory TR6060 Six Speed TSB Performed by Ford SVT Mechanic
o SPEC P-Trim Dual Disc Clutch
o Shelby Billet Aluminum Shifter
o Ford Racing 3.73 Gears
o Torsen T2R Racing Differential (less than 50 miles on it)
o Dynotech 3.5” Aluminum One Piece Drive Shaft
o Moroso Catch Can
• Exhaust
o Ford Racing Coated Shorty Headers
o Stainless Works Off Road X-Pipe
o Borla XR-1 Racing Mufflers
• Safety
o Custom Built Tig-Vision SCCA/NASA Legal 10 Point Cage 1.75” Steel
o Sparco Ford Racing Seat with Side Bolsters Drivers Side also have OEM Drivers seat
o Schroth 6 Point Harness
o Passenger seat is OEM
o Window Net
• Gauges
o AEM Wide Band Air/Fuel Meter
o Autometer Cobalt Gauges
o Oil Pressure
o Oil Temperature
o Fuel Pressure
o Water Temperature
o Boost Pressure
• Appearance
o Silver Horse Racing Rear Quarter Window Louvered
o Suncoast Hoods Aftermarket Ram Air Induction Hood
o Agent 47 Rear View Mirrors
o Race Skinz Carbon Fiber Front Splitter
o Run Cool Racing Hood Louvers
o Drake Billet Aluminum Hood Pins
These are links to the suspension from Griggs. This is the exact same suspension as on my car. With the exception of S-197 Hubs on the Front.
Car corner balanced and weighed in at 3,726 without driver.
Front Suspension Photos
S197 Front Install Photos
Rear Suspension Photos
S197 Rear Install Photos
Pictures by RevanRacing - Photobucket
Let me know what questions you may have.
All reasonable offers considered.
Many thanks,
Please email me or call if you have any questions. [email protected]
Van Collier
Revan Racing, Inc.
561-445-7702
• Cooling System
Revan Racing/C&R Racing Radiator (New), Revan Racing/C&R Dual Fan Heat Exchanger, Revan Racing/Shelby Black Anodized Reservoir Kit
This is the car that I developed the Shelby Cooling System on.
• Items Removed
o A/C Delete
o Radio Delete
o Each could be reinstalled if necessary
• Suspension: Griggs Racing GR40 TT Suspension
o Front Chassis
o K-Member Front Cradle, S197
o Solid Modular Motor Mount set
o SLA Lower Control Arm Set, adjustable, severe duty
o SLA Tower Set S197
o S197 Lower Steering Shaft
o Bump Steer Kit with Aluminum Drop Spindle
o Drop Spindle, Alum. Kit w/S-197 hubs
o GR40 Steering Rack
o GT500 Power Steering Cooler
o GR40 Steering Rack Plumbing GT500
o SLA Upper Control Arm Street Set
o F1 Anti Roll Bar Kit, Front Adjustable Zero Bind
o SFCO 8-1000 Springs, C/O 2.5" x 8" x 1000
o SLA Yellow 30 Series Front SLA Shock Kit w/Coil-Overs
o 1 MDS 2500 A5 Cooling Duct/ABS Pick-Up Mount, Drop Spindle
o Brake Caliper Bracket Kit
o 3” ARP Wheel Studs
o Rear Chassis
o Watts Link System with Watts Link T/A Cover
o Torque Arm
o Double Adjustable Lower Control Arms
o Control Arm Relocation Brackets
o 315 Kit (For use with 10.5” wide rims and 315 or wider tires)
o Koni Coilover Shocks with Street Valving
o SRCO Coilover Springs
o Rear Anti-Roll Bar
o ARP 3” Wheel Studs
o Rear Differential Catch Can
• Braking
o Stock Brembo 4 Piston Brakes
o dba 5000 Series 2-piece Slotted Rotors (Cryogenically Treated)
o Stock Single Piston Rear Brakes
o dba 4000 Series 1-piece slotted Rotors with Steeda Brake relocation kit
o Hawk DTC 70 Racing Brake Pads Front
o Hawk DTC 60 Racing Brake Pads Rear
o Brembo LCF 600 Plus Racing Brake Fluid
o Full Brake Duct Kit
• Wheels and Tires
o Forgeline ZX3R 18” x 10.5” Matte Black Titanium Bolts Hoosier R6 Tires 315’s on all four corners
o Stock GT500 Rims 18” x 9.5” with Hoosier R6 Tires 295’s as spare set
o Stock GT500 Rims 18” x 9.5” with Goodyear Supercar Tires 285/40’s
• Engine
o Engine Built by L&M Engines (Built October 2010. Less than 200 Miles)
o Ford GT WS Aluminum Block assembled with ARP 2000 Hardware This is the FORD GT Aluminum Block that Ford has discontinued.
o Ford GT Cams Degreed
o 9.5:1 Compression
o Diamond/L&M Custom Pistons with Valve Relief
o AP Rings Hand Filed
o Oliver Billet I Beam Rods with ARP 2000 Rod Bolts
o Manley Titanium Valve Spring Retainers
o Ferrea Super Alloy Exhaust and Intake Valves
o Speed Pro Main and Rod Bearings
o Canton Road Race Oil Pan
o Thump Racing Billet Aluminum Belt Tensioner
o NGK TR6 Spark Plugs
o Kenne Bell 3.6 Liter Liquid Cooled Supercharger Stage 3 Kit Extra Pulleys
o Tuner is SCT XCAL 3
o Ford Racing 80LB Injectors
o Fore Precision Black Anodized Evolution Performance Fuel Rails
o Kenne Bell Competition Boost A Pump for Fuel Delivery
o PCV Catch Can System
• Transmission
o Factory TR6060 Six Speed TSB Performed by Ford SVT Mechanic
o SPEC P-Trim Dual Disc Clutch
o Shelby Billet Aluminum Shifter
o Ford Racing 3.73 Gears
o Torsen T2R Racing Differential (less than 50 miles on it)
o Dynotech 3.5” Aluminum One Piece Drive Shaft
o Moroso Catch Can
• Exhaust
o Ford Racing Coated Shorty Headers
o Stainless Works Off Road X-Pipe
o Borla XR-1 Racing Mufflers
• Safety
o Custom Built Tig-Vision SCCA/NASA Legal 10 Point Cage 1.75” Steel
o Sparco Ford Racing Seat with Side Bolsters Drivers Side also have OEM Drivers seat
o Schroth 6 Point Harness
o Passenger seat is OEM
o Window Net
• Gauges
o AEM Wide Band Air/Fuel Meter
o Autometer Cobalt Gauges
o Oil Pressure
o Oil Temperature
o Fuel Pressure
o Water Temperature
o Boost Pressure
• Appearance
o Silver Horse Racing Rear Quarter Window Louvered
o Suncoast Hoods Aftermarket Ram Air Induction Hood
o Agent 47 Rear View Mirrors
o Race Skinz Carbon Fiber Front Splitter
o Run Cool Racing Hood Louvers
o Drake Billet Aluminum Hood Pins
These are links to the suspension from Griggs. This is the exact same suspension as on my car. With the exception of S-197 Hubs on the Front.
Car corner balanced and weighed in at 3,726 without driver.
Front Suspension Photos
S197 Front Install Photos
Rear Suspension Photos
S197 Rear Install Photos
Pictures by RevanRacing - Photobucket
Let me know what questions you may have.
All reasonable offers considered.
Many thanks,
Please email me or call if you have any questions. [email protected]
Van Collier
Revan Racing, Inc.
561-445-7702
Last edited:
