heavily modded 03 vert

slash

Member
Established Member
Joined
Nov 9, 2005
Messages
530
Location
chicago
This is my baby, original owner. 15,xxx miles, no accidents, no stories, perfect carfax. air blows cold, mint condition! i have all the original paperwork including the sticker, invoice and mso. I have run a best 10.682 @ 132 with a 1.6 60ft. no more than 20 passes were made and NEVER SPRAYED! the car made 657 rwp and 649 tq with only 18* timing and 110 octane(which is all i use!)


i an very firm on the price, as i priced it very well. (29,995). a clean 03 vert with only 15k would go for around 25k alone.

i cant even begin to say what i have in this car. ask anyone in the chigao area and they will tell you the car was done right.

i also have a 24 ft enclosed trailer that is 3 mos old that can be negotiated as well(WILL NOT SEPERATE OR PART OUT, PLEASE DONT ASK!)


here is the mod list, i spared NO expense and im sure im forgetting something.

-Kenne Bell 2.8h
-Kenne bell Boost a spark
-Kenne-Bell Boost-a-Pump w/ wiring upgrade
-Riechard Racing manual Tensioner
-Billetflow 5 pce. idler w/ tensioner
-Kenne Bell 3.5 upper
-8# lower
-accufab polished throttle body
-Custom 5 gallon ice box in trunk
-Mac pro dumps
-Bassani optimum length ceramic Headers
-SCT Livewire programmer
-60 lb Bosch Fuel Injectors
-twin gt pumps
-aeromotive filter
-8 NA fuel line
-NGK TR6 Plugs
-SCT 90mm Big Air MAF
-JLT High boost intake
-K&N air filter
-K&N crank case breather
-k&N Oil filter
-optima red top
-MGW shifter (blue handle)
-Steeda ball
-slp line lock
-ldc upper and lower grill(black)
-ldc head cooling mod
-ldc hoodlight mod
-Fiore Adjuster
-Fiore Quadrant
-Liberty Gear 26 Spline Input shaft
-Centerforce DFX Clutch Disc
-Centerforce DFX Pressure Plate
-Centerforce Throw Out Bearing
-fidanza aluminum flywheel
-upr tubular k member
-upr control arms
-upr coilovers
-lakewood struts
-METCO - Adjust. Upper & Lower Control Arms
-2003 Mustang GT 8.8 Housing
-Welded Axle Tubes
-Eaton 31 Spline Posi
-Strange - 31 Spline C-Clip Axles
-Ford Racing 3.73 Gear
-LPW Ultimate 8.8 Aluminum Diff Cover
-Fluidyne heat exchanger
-Dynotune 50 pre maf dry shot
-10# n20 bottle
-Dynotune super purge
-Msd digital window
-Ford racing shock tower brace
-Billetflow dif brace
-drive shaft saftey loop
-H&R RR Springs
-MM CC plates
-Autometer lunar boost/vac
-Autometer A/F guage
-Autometer water temp
-Sct carbon fuel rail fuel pressure guage
-dual a pillar pod
-steering wheel pod
-Raptor shift light
-mt front runners
-28-10.5-15 mt slicks
-steeda 6pt. welded cage
-Kenne brown sub frame connectors
-UPR billit engine compartment kit (complete)
-UPR painted wiper delete
-Upr Antenna delete
-20% tint
-Stainless "cobra" bumper inserts
-bogart d-10's
-Saleen light bar
-Royal Purple Synthetic oil
-Emissions delete

DSCN4978.jpg

DSCN4977.jpg

DSCN4975.jpg

DSCN4974.jpg

DSCN4971.jpg

DSCN4967.jpg

DSCN4964.jpg

DSCN4905.jpg

imsm1.jpg

plote.jpg
 
Last edited:

slash

Member
Established Member
Joined
Nov 9, 2005
Messages
530
Location
chicago
i have some business opportunities and i need to sell. the car is fine, a routine compression test last month showed 165 in each cylinder and less than 5% variance. thes car is absolutely perfect. i just dont have the time or continued money to spend anymore. this car will be a steal for someone. it is all top of the line and done right. plenty of references availablb.
 

shhak

Active Member
Established Member
Joined
Mar 31, 2007
Messages
2,648
Location
Iron City, TN
Do you have the title in hand? You say the price is firm? How much for the car and trailer? Thanks
 

slash

Member
Established Member
Joined
Nov 9, 2005
Messages
530
Location
chicago
more pics and wideos on request, need to sell...

this car is priced to move quikk.
 

shhak

Active Member
Established Member
Joined
Mar 31, 2007
Messages
2,648
Location
Iron City, TN
If the car doesn't sell on ebay, I may be interested if you're willing to work a little on the price. LMK. Thanks
 

slash

Member
Established Member
Joined
Nov 9, 2005
Messages
530
Location
chicago
shhak said:
If the car doesn't sell on ebay, I may be interested if you're willing to work a little on the price. LMK. Thanks


if it does not sell on ebay, i will keep it. demod it sell the parts for 10 grand then sell the car for 25k, but thanks.
 

Users who are viewing this thread



Top