New motor only has 150 miles on it.
Listing of aftermarket items:
-Stroker Shortblock - 4.6 4v stroker short block. Motor includes JE
Spherical Dish Pistons, File to Fit rings, HP Stroker crank, Olliver
Billet Rods, ARP Main studs.
-Custom Paint - Valve Covers
-ARP Head Studs - L19
-Ported Heads - 4v - Full Port and Polish on heads, new
valvetrain, Valve Seals and Five angle valve job
-Stainless Steel Valves
-Bronze Guides
-Billet 4v Blower Camshafts
-Comp Cams Valvesprings 4v with retainers
-Billet Oil Pump Gears
-NGK Spark Plugs
-Misc. Parts For Viper spec upgrade
-Transmission Rebuild
-Redline trans. Fluid
-High amp Altenator (220 AMP) 249.99 249.99T
-HPP twin turbo system
-Full front suspension kit
-Sullivan lower intake
-Sheetmetal upper for Sullivan lower
-Twin hi flo cats in mid pipe
-Twin electric cutouts
-D&D 26 spline input shaft for T-56 with shim kit
-Complete fuel system (87-93 new gas tank, 87-93 sender,
vent, fill grommet, 94-95 fill tube, drop in pickup, -10 line
running to weldon filter, weldon 2025 fuel pump, weldon filter
after pump, -10 line running to the front, high flow Y, -8
running into the rails, -8 to weldon FP reg., -8 return to the
tank, with a hobbs switch for the race switch on the dial a flow
-75lbs injectors with adaptor harnesses
-Turbosmart E-boost 2 (boost controller)
-Water temp. gauge
-Wideband A/F gauge
-Electric FP gauge
-Cluster pillar for 2 gauges
-A-pillar for 2 more gauges
-Upgraded radiator & 160* thermostat
-SCT BA 2800
-Dyno Tuned
PM me if you need more info.
All work done by HPP
Listing of aftermarket items:
-Stroker Shortblock - 4.6 4v stroker short block. Motor includes JE
Spherical Dish Pistons, File to Fit rings, HP Stroker crank, Olliver
Billet Rods, ARP Main studs.
-Custom Paint - Valve Covers
-ARP Head Studs - L19
-Ported Heads - 4v - Full Port and Polish on heads, new
valvetrain, Valve Seals and Five angle valve job
-Stainless Steel Valves
-Bronze Guides
-Billet 4v Blower Camshafts
-Comp Cams Valvesprings 4v with retainers
-Billet Oil Pump Gears
-NGK Spark Plugs
-Misc. Parts For Viper spec upgrade
-Transmission Rebuild
-Redline trans. Fluid
-High amp Altenator (220 AMP) 249.99 249.99T
-HPP twin turbo system
-Full front suspension kit
-Sullivan lower intake
-Sheetmetal upper for Sullivan lower
-Twin hi flo cats in mid pipe
-Twin electric cutouts
-D&D 26 spline input shaft for T-56 with shim kit
-Complete fuel system (87-93 new gas tank, 87-93 sender,
vent, fill grommet, 94-95 fill tube, drop in pickup, -10 line
running to weldon filter, weldon 2025 fuel pump, weldon filter
after pump, -10 line running to the front, high flow Y, -8
running into the rails, -8 to weldon FP reg., -8 return to the
tank, with a hobbs switch for the race switch on the dial a flow
-75lbs injectors with adaptor harnesses
-Turbosmart E-boost 2 (boost controller)
-Water temp. gauge
-Wideband A/F gauge
-Electric FP gauge
-Cluster pillar for 2 gauges
-A-pillar for 2 more gauges
-Upgraded radiator & 160* thermostat
-SCT BA 2800
-Dyno Tuned
PM me if you need more info.
All work done by HPP