I AM NOT PARTING THIS OUT!! I was going to put together a modular with the Cobra supercharger setup for my 87 GT and have decided that I am done with mustangs for awhile. So, if you are wanting to put this on a Mach 1 or 99-up Cobra then I know you will need a few more parts. I am not looking for any trades. $2950 FIRM I would rather not ship these parts but will on your dime.
Pics of what I have are here: 03/04 Cobra parts - a set on Flickr
Parts list that I have:
Stock Eaton painted in Crinkle black-stock pulley
Fuel rails w/fps
Intercooler
Intercooler adapter
Lower intake
Stock throttle body and plenum w/sensors
C&L 95mm MAF meter and sensor
Pulley bridge w/tensioner and pulleys-Crinkle black
Idler bracket w/pulley (above water pump)
Timing chain cover and tensioner--in different pics
Harmonic balancer
Stock lower s/c pulley & cage
Upper and lower alternator brackets
Oil cooler--all three pieces
Thermostat housing and hoses
(2) Metco 100mm idler pulley's
UPR 90mm s/c idler pulley kit
Small Canton intercooler tank
Large Canton intercooler tank--requires battery relocation
Fluidyne heat exchanger--has had a small repair done-does not leak
Heat exchanger lines
One heat exchanger bracket (bent a little)
Pair of heat exchanger bracket clamps??
Intercooler pump wiring pigtail
Two odd pulleys
Used accessory drive belt
Pinion yoke (its going with the parts)
**EGR valve and vacuum lines and stuff on side of supercharger--waiting for them to arrive**
**No pictures of these parts**
Missing parts that I know of and the price of them:
Coolant crossover tube $80 new
Throttle cable and bracket $50 new
Injectors $100 used
Intercooler pump and bracket $80 used w/bracket or $80 new
Alternator and plug $125 used and $25 for Plug new I think alternator from
01-up V6 is the same??
Couple of coolant lines-both from intercooler adapter and one from the
thermostat housing--I think that is all the hoses that I am missing??
Intake tube from MAF to Throttle body $35 used
Heat exchanger brackets as the one that I have is bent a little
S/C drive belt
Power steering reservoir tank & bracket $40-$75
Again, I am not parting this out. If it does not sell in a couple of months then I MAY start a new thread with the parts listed. Please do not fill up the thread with I want this or that posts. Thanks billy
Pics of what I have are here: 03/04 Cobra parts - a set on Flickr
Parts list that I have:
Stock Eaton painted in Crinkle black-stock pulley
Fuel rails w/fps
Intercooler
Intercooler adapter
Lower intake
Stock throttle body and plenum w/sensors
C&L 95mm MAF meter and sensor
Pulley bridge w/tensioner and pulleys-Crinkle black
Idler bracket w/pulley (above water pump)
Timing chain cover and tensioner--in different pics
Harmonic balancer
Stock lower s/c pulley & cage
Upper and lower alternator brackets
Oil cooler--all three pieces
Thermostat housing and hoses
(2) Metco 100mm idler pulley's
UPR 90mm s/c idler pulley kit
Small Canton intercooler tank
Large Canton intercooler tank--requires battery relocation
Fluidyne heat exchanger--has had a small repair done-does not leak
Heat exchanger lines
One heat exchanger bracket (bent a little)
Pair of heat exchanger bracket clamps??
Intercooler pump wiring pigtail
Two odd pulleys
Used accessory drive belt
Pinion yoke (its going with the parts)
**EGR valve and vacuum lines and stuff on side of supercharger--waiting for them to arrive**
**No pictures of these parts**
Missing parts that I know of and the price of them:
Coolant crossover tube $80 new
Throttle cable and bracket $50 new
Injectors $100 used
Intercooler pump and bracket $80 used w/bracket or $80 new
Alternator and plug $125 used and $25 for Plug new I think alternator from
01-up V6 is the same??
Couple of coolant lines-both from intercooler adapter and one from the
thermostat housing--I think that is all the hoses that I am missing??
Intake tube from MAF to Throttle body $35 used
Heat exchanger brackets as the one that I have is bent a little
S/C drive belt
Power steering reservoir tank & bracket $40-$75
Again, I am not parting this out. If it does not sell in a couple of months then I MAY start a new thread with the parts listed. Please do not fill up the thread with I want this or that posts. Thanks billy
Last edited:
