Running 19x10 AM leguna seca replica wheels square

[tek302]

Can I run the 19x10s on the front as well or will they rub?

 

[bosscj]

Can I run the 19x10s on the front as well or will they rub?

A 19x10 will fit in the front just have to check the back spacing and offset.....I'm planning to run the 19x10f 19x11r gt350 wheels

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[tek302]

Offset is

+47.5mm

 

[tek302]

They do not fit on the front

 

[KBBoss302]

I ran FRPP Laguna reps at all 4 corners in 19x10 with 285/35/19 Bridgestone RE11s on my Boss with zero problems. No spacers, no rubbing, was on P springs at the time. Only thing I did was trim the upper swaybar bolt to make sure the inside of the front tires had plenty of clearance, but I don't know that it was necessary. They are just very heavy (~34lbs if I remember correctly).

 

[tek302]

30lbs. still heavy

 

[KBBoss302]

It looks like the AM ones are lighter than the Ford Racing ones I had.

https://lmr.com/item/M1007DC1910LGB/2005-12-Mustang-Ford-Racing-19X10-Boss-Rear-Black-Wheel

Because the AM ones are not exactly the same wheel, maybe they won't work up front. You might want to buy just one for a test fit. Good luck.

 

[hand-filer]

Not 19's but these look intriguing:
http://www.s197forum.com/forum/showpost.php?p=2371908&postcount=1

http://www.s197forum.com/forum/showpost.php?p=2372485&postcount=2

 

[SVOGT302]

They do not fit on the front

Sounds like you answered the question.

Sent from my SM-N910P using the svtperformance.com mobile app

 

[ford20]

They do not fit on the front

They most certainly do .... Not AM Replica's my bad.

 

[bosscj]

They most certainly do .... Not AM Replica's my bad.

Oooooo weeeee that's a good looking boss

Sent from my SAMSUNG-SM-G935A using Tapatalk