Fopar's latest activity

Ya but 01 prolly has similar map axes to 03-04, I'd bet 96-98 has different shiz... What param did you used to log for knock retard?

I only have a single year license :/

Been datalogging my 98 cobra, 100% stock vehicle, check out the timing transition at 5200.... drops down to 19ish degrees (green trace)...

If anyone is curious the voltage reg is different. Not sure what the mountaineer uses, probably ECU controlled but will probably need...

Seems like other 4 valves/'some' 2 valves are the same? Physically looks the same. Yet rockauto has different part numbers. Anyone...

Seat recommendations? Looking to shelve my heavy mystichrome seats, looking for something comfy, recline able and at least lighter than...

:|

Anyone know T-45s here? Curious if the 1-2 and 3-4 synchro assemblies are the same or different, also T-56/T-45 input shaft the same?

Just build a 96-98 cobra... or GT... you're gonna SRA swap the terminator anyways... Also a turbo motor on a terminator with stock ECU...

Yes you're correct 0316 is first 1000, I meant 300.

Long terms are also o2 based... the problem with long terms tho like I said is the learn parameters. Stick to short terms for...

I mean... sounds like you convinced yourself a slightly leaking line was the culprit after u made huge changes to the MAF table :P Have...

Idles fine... idle vacuum is fine...doesn't throw codes at idle or WOT only at high rpm light load. Eventually I'll do a comp test but...

Hmm interesting, not sure if these are datalogging anomalies, ECU issues or my TMAP is going bad... don't think this would cause the...

I put the rest of the OEM coils back in, checked the crank sensor connector, blew it out with some electrical cleaner and compressed...