Recent content by Hercules331

Tried searching but just cant find the same setup. Any recommendations on what belt size I need? Heres was I got: 2.8 Upper 6# Lower 3.5 Alternator Pulley 4 set Billetflow Idlers (1x92mm, 3x100m) Thanks!

Yo duude check out da overnight parts from Japan!!! Cant wait to have MPH install all this sh*t!

Right now on the Cobra Im running 13 psi. I have a 2.8 pulley (stock lower i think) and a amazon tune (I used to run 15 psi but lost some due to the install of long tube headers). I want to increase my boost to at least 17 psi. Im looking for 500/500 dyno numbers. Right now Im about 450/450...

So Im thinking about beefing up my suspension on my 03 cobra to go with the new tires and upcoming engine mods (see other thread), and what to know what yall think about these upgrades. Right now its all stock except h&r springs and steeda IRS bushings. MM Low Profile IRS Bolts Steeda...

Hey yall. So I just recently moved to Savannah and am looking for a good shop to get some work done to the cobra. I want to port the blower and run about 17 psi and do some major suspension upgrades. I dont want to take it to just some random auto shop. Anyone have any recommendations...

So I need to get new tires on the cobra because Im having alot of rubbing problems. Shes running 18x9,18x10 FR500 wheels with 275/35/18 up front and 285/35/18 in the back. The rears also have a 1 in spacer. Now the main reason Im having problems is because the car is so low. Its lowered 2...

Ok so this girl I know has a 2006 F150 and left chapstick in the truck and it melted, then she took the cap off and it got all over her seats, leaving a stain. We tried different things to get it out, like soap and water, goo-gone, and some car upholstery cleaner. The water actually make some...

I have HID fog lights waiting to be installed and I found a thread that explains how to install them but doesnt explain how to get the stock fog lights out. Anyone know an easy way to do this? Or a thread that explains how to do it? Thanks

I recently had a SPEC Stage 3+, steeda quadrant, steeda f/w adjuster, and new clutch cable installed and I am trying to figure out how to adjust it. I know you turn the blue thing on the firewall left or right but I dont know where a good spot is to set it. If I turn it too much then the...

Well, after 3 months stationed in Ft Lewis Washington, and lots of work being done on the Cobra while I was gone, I have returned to Pennsylvania to finally see the finished product. And I am quite pleased. I bought her about 10 days before I got shipped out to Washington, and she of course...

I put this thread in this section because its not really car specific... Anyway, I just got 3 new Autometer NV Gauges installed (A/F, Boost, Temp). Well they are bright as sh*t. The boost and temp are the only ones that light up but they are so bright its really annoying, they shine in your...

I'm trying to install H&R wheel spacers on my termi, but cant figure something out. On two of the wheel studs there are these metal clip-like looking things down at the rotor end of the stud. They look like theyre screwed onto the stud and pushing against the rotor (perhaps to keep the rotor...

This question is for any of you that blog. I am thinking about starting a blog to keep my family informed on my Army travels. But I don't know which websites are good to use. I will probably be posting pictures, maybe even videos. I dont really know anything about blogging though. So where...

So I saw Death Race tonight and the movie wasn't actually that bad. BUT the best part about it was seeing the trailer for Fast and Furious, which looks awesome and I'm excited as shit. Ok bring the :burn:

Does anyone know where to put the sensor for a transmission temperature gauge on the cobra transmission? My mechanic said he's not sure although hes done it many times before on other Ford transmissions. Thanks