Quick Strike's latest activity

https://www.eastwood.com/ew-radiator-black-12oz-satin-finish.html

I would have the bores checked for taper and wear. Then depending on the results, go with a hone or smallest overbore possible for your...

Any updates? Sent from my iPhone using Tapatalk

Other then degreeing the cams, I also found building the engine very satisfying. Especially when it dynoed at 743 RWHP on 93 and Torco...

duplicate

duplicate

duplicate

duplicate

duplicate

duplicate

duplicate

I built the engine. My local NAPA machine shop did the machine work. They do a lot of circle track engines and followed my instructions...

My tuner sent me a no boost break in tune after I built my engine. He asked me to put 1k miles on it before bringing it in for Dyno...

Fit with the Stock K just fine. I had to modify the convertible brace. That won't be a problem unless you have a vert.

I had the Steeda version of the Borla system with the stock H and manifolds. People would come up to me years later and say it was one...