Bringing an old thread back from the dead, but had the car dyno tuned last week on some Bassani Mid Lengths and x pipe. I'm happy with the results given the lower compression pistons:
https://www.svtperformance.com/threads/wondering-about-bassani-mid-length-headers.1140943/
Anyone in here running an AEM wideband (30-0300 part number) with the SCT analog input cable (SCL-9608) successfully? I am having some issues getting mine to work. Here is how I have it wired:
AEM side
-Red to number 8 fuse via an add a fuse
-Black to ground (crimped together with the 3...
I am officially stuck :)
I've got a 98 Cobra that I recently built an engine over the winter. The full details can be found in my build thread on here, but a quick recap:
98 Cobra
-4.6 4v Teksid block with forged bottom end
-DB Casting C heads with 98 Cobra Cams
-Mach 1 Intake manifold with...
Car is a 98 Cobra. Previous setup was stock manifolds, h pipe and Borla S type catback. Second setup was Pacesetter LT's, Pacesetter X pipe and same Borla S type catback. I've now gone to Bassani Mid length headers with the matching Bassani offroad X pipe. I bought the exhaust off a guy who...
All prices are shipped in the lower 48
Division X 99-04 Fuel Rails - $old
Spec Aluminum 8 bolt flywheel. Needs new friction surface - $120
B Head powdercoated coolant crossover - $old
C Head Vortech / Paxton Coolant Crossover - $old
99-04 C Head Power Steering bracket. Perfect for the 96-98...
I have a brand new Holley HP EFI system. Everything is brand new in the box, never installed. I removed everything from the box just to show that all parts are there. Part number 550-617N. Fits 99-04 4v 4.6 Mustangs. I'm located just east of Cincinnati. Local meetup is preferred, but I...
Hi All, not new to Mustangs and have had many in the past, but picked up a 1998 Cobra this past spring after not having a Mustang for probably 6-7 years. Car is in really nice overall shape, but I have been plagued with a high idle issue since I got the car.
Issue #1 -> Car starts, runs and...
Please read thread in it's entirety before contacting. I've given a lot of detail on the cars EXACT state.
1993 Mustang LX hatch, 53k original mile car. Never ever had rust anywhere EVER. Sitting on 98 Cobra wheels now though. It’s a basic roller. I’ve owned it for 11 years.
-Original...
I have a complete set of wheels and tires off of my mustang for sale.
-(2) Front 17x9 OEM Ford 03 Cobra wheels, powdercoated black, never been driven on since the wheels were powdercoated
-(2) Rear Brand New 17x10.5 03 Cobra DEEP DISH replica wheels, black with polished lip
-Front tires...
2000 Ford Lightning
Good:
-38k original miles!
-Red with gray interior
-Completely stock save for a Magnaflow catback exhaust. Engine has never been modified in any way. No pulleys, not even a cold air intake. Exterior is completely stock. Interior is completely stock save...
I have a brand new in the box Turbosmart Raceport Blow Off Valve. It's the black upper version.
$230 shipped FIRM.
Actual pictures:
I have no idea why they include all those extra slots in the foam when nothing goes in them. I'm guessing they probably use it universally...
I have a brand spanking new in the box, never even opend Autometer Nexus Oil Pressure gauge, part number 6453. These are extremely cool gauges and can be setup to show up red (or other color when the gauges are already red) when that parameter reaches whatever limit you've set. These come with...
-5.0/5.8 Tremec 3550 with stock aluminum bellhousing and stock shifter, works great - $1000
-Pro 5.0 Shifter for 3550 with handle - $100
$1000 + shipping for entire package!!!
Please call me with any questions, 513-315-6583.
Just wanting to see if there are any options out there for trades.
I have 8 wheels in total, 4 tires in total.
-17x4.5" Racestar front runners, 2.25" backspacing, used but in good shape, could use a polish. I DO have the offset washers and lugs to go with these.
-15x10" Greg Weld / Race...
I am looking to trade the complete ready to go drivetrain from my 93 Mustang for a 93-01 Cobra, 2nd Gen Lightning or may consider other cars ready to go.
The car has been setup to be turbo ready. Top of the line parts used throughout the build. I have over $12k in this setup and I'm going...
I'm not going to use this gate right now so no sense in having it sit around. It is used but is in good shape. This is their new compact gate. It is unbelievably compact. Comes with both clamps and all hardware.
Here are pics of the gate:
$150 shipped.
I have a MGW shifter with the orange handle for a T5 / T45. Will work for you 94-98 Cobra guys. Shifter is in great shape. I took this in as partial trade when I just recently sold my D&D T-56 swap.
I will get pics up tonight.
$135 shipped.
D&D T-56 6 speed swap for 302/351 into a fox body mustang.
Trans, crossmember, shifter, clutch and driveshaft have less than 1k miles on them and were in a 93 Cobra. Quicktime bellhousing is brand spanking new, just mounted up.
Includes:
-T-56 6 speed with mechanical speedo...
Posting for a good friend of mine. He's looking for something a little sportier and cheaper.
Trades to be considered:
96-01 Cobra + cash or possibly an 03 Cobra
Year, Make and Model of Car? 2005 Infiniti G35X
Mileage? 49k
Price? $17,000 or partial trade for? Price is negotiable...
Ugh, I can't believe I'm doing this but after adding up what I still need I just cannot afford to make this car what I want it to be. I'm tired of spending paycheck after paycheck on this car to barely see any improvement month after month. I'm going to sell everything but the car itself and...
I cannot believe I'm doing this, but I've found something I want bad and I think these will be the easiest to sell of what I'm selling.
I have a set of PERFECT 18 x 8.5 / 10 BBS RK wheels. Wheels have been freshly painted gunmetal and cleared, 4 brand new center caps/BBS logo valve stem...
I apologize if this has been gone over before, but the search is failing everytime I try.
I'm looking for information on how an 03' Cobra front bumper cover will fit on an 01' Cobra. I'm thinking about going with the 03'.
Thanks
I've got a Mac 3" catback on the 01' Cobra and it's too loud for me as I daily drive the car. The driver side tailpipe needs a hanger welded on in order to install the tailpipe.
$250+ shipping.
I've started to notice a few fuel symptoms recently on my car, and I knew there was a problem when my fuel filler cap light came on yesterday.
At first, I started to notice a fuel smell coming from my car and my g/f mentioned it as well since she was always on the passenger side.
Then a...