Got the #4 out today and getting ready to put newly refreshed 377 back in. Haven't done much with it in years. Just thought for those of you that remember it, you should know it is still around.
My 2017 GT350 has been the noisiest car I have ever owned. Last year I installed long tube headers, it was so high pitch that it was unbearable to rev up. On the street if you went over 3000 the sound was AAAAAAAAAAAAAHHHHHHHHHH. So I pulled exhaust and added a dual in and out x flow muffler...
So I got out R's, Cleaned them and drove the three of them. Each has its own unique driving style, all seem under powered, all have good handling skill sets. I do not know why but I really like the 95s. Anyone else do new years?
Just got back from a day at track, took both cars to have a side by side comparison, should not have. I have open tracked the 350R since new and came from a 00R, big difference between those two. Wringing the snot out of the 350R it is a fast track car, handles corners very well, at the end of...
Drove car yesterday at dealership, picking it up Monday morning, no caster camber plates in trunk, they do not know, they did not install them. Are they on car? It does have pins thru strut towers but I cannot see under. The dealer is 3000 miles away so making sure I get the plates. Anyone know?
Going to pick up car at end of month and would like to not take freeway home. Myrtle Beach SC to Boise ID. I have never been east of Tennessee and really not explored any roads twisty from Colorado east. A cross country drive, 2300 to 3000 miles in under 5 days in a new GT500 CFTP and no...
Looking for any pictures, detailed of the joker paint scheme. Have car and I am going to redo the Joker paint. I have some pictures but would like more detailed photos to be able to complete this task. I have had the car for the last 10 years and have used it for open tracking. I also have...
So lets say I get Bassani to make us headers, I need to know how many and are you willing to pay up. I would make the exhaust 3" with a X and small mufflers out the rear. Most likely looking at around $3000 for complete system. What interest do we have.
Just got car running again, changed motor, rear springs rate, and wheels. Should get on dyno before the end of the weekend to see how it works. Sounds good, I used Borla Cobra exhaust cut off and dumped after the IRS.
Anyone out there making or have a pattern for long tubes yet, new engine is ready and I just dont want to put in the old stock headers. I may have to do this tell I can get car to Bassani and have a set built. Just looking for the easy way out.
Here is a shot of the 2 Cobra Rs running the track in Spokane, I rented the track and 13 of us ran over and over. We had all three years present and running. Those of you how say the 93r and the 95r are not up to it should have been there. Fun weekend.
Can anyone give info on the valves used in a 2000r and installed height, spring height, over all length of valve. We think intake valve should have a overall length of 5.439 but no valve can be found. Any help?
Looking for larger more functional spoilers for the gt500, found at top speed the car needs more downforce, looking to find functional front splitter and rear wing, any ideas? I was in a event in Idaho that was a 2 mile top speed run, the car did 188 as radared by police, I think this year a...
Looking for you guys running the full front k-member and control arms, it seemed to have widened track, how low do you set the suspension? I have 275/40/18 on stock wheels and have the car set to 6.75" at front rocker panel(below Door) and 26.75 to the top of fender. Worried about tire rub on...
Looking at Replacing Clutch and Clutch manufacturer claims past problems with Cobra R flywheel, Starter Ring and Faceplate rivets. Anyone seen a problem? I have no problems and don't want to blow money for nothing.
2004 Saleen Supercharged, 12600 miles, all saleen upgrades, interior, radiator, brakes, center exhaust, rear spoiler, 9"/10" wheels, new Nitto 555 tires, Bear upgraded rear brakes, Tubular cross member, Poly bushings front and rear, engine and trans stock. Rated at 365hp. Can email pictures, I...
Talking to Bassani again, thinking of taking car to design a set of headers, what kind of interest is out there for "Roughly" a $2000 dallar set of long tube headers. Does that amount of money leave enough interest out there to design and build them?
Is the header flange the same bolt pattern as the 03-04 Cobra, Talking with Bassani and We don't know if they use the same flange pattern. What headers are you racers using?
I work on allot of cars, recent is a Viper open track car, he would like to open track with me. The problem I have is the vipers and Vets of modern day have big HP numbers. This Viper did 450RWHP before I changed the cam and heads. I will dyno in a week. Same dyno, Mine, showed 385RWHP in my...
Winters Little Storage Shortage
Just thought we could think about all us northern people who dont get to use them during winter. Maybe I need to sell a few cars?
Anyone going to Barret Jackson, no Rs that I have seen for sale. Using new ride to haul a couple of cars to Silvers, I am able to haul a couple back if any interest, Northwest area.