I have a 2000 gt with a firewall adjuster and a quadrant. I put in a new clutch less than a few hundred miles on it, and thought i had the clutch adjusted well, but i think its set up wrong. When i put it in reverse, it clunks and lurches backwards a little bit with the clutch fully depressed...
Ok everyone 2000 GT ac question here.
I had a very low system but it wasn't empty. I pulled a vacuum on it and it wouldn't hold vacuum long at all, maybe 5 minutes. I wanted to locate the leak so I added r134 with dye in it.
About 24 hours after charging it I heard a hiss sound while in...
Needed a newer truck, picked up an ingot silver 11 fx4 screw with the 3.5 ecoboost, 46k miles, certified pre owned.
Truck is in pretty good shape, other than rust in a few spots. On the driver bedside i found a spot where the rust has started. Paint is flaking off in about a 6" area. Its on...
anyone ever had a set of siemens deka 60's leaking? put a set on my 00 gt and on the driver side the two in the middle are leaking. the 42 delphi's i had never did this. it is leaking at the rail.
i thought maybe, possibly, it was the injector, or o ring. i moved the ones that were leaking...
guys i just put a set of 03 cobra pumps and a 40 amp boost a pump in my 00 gt's stock tank. when i hit the key, a groaning sound comes from the tank for about 3 seconds before it goes away. is this normal? or have i fudged something up?
pro m univer maf, had it about 7 years, works fine on my procharged setup
$100 shipped:
20 amp bap, used for about 2 years, has worked fine for me, upgrading to dual pumps. wired at 100% all the time and was installed pre fpdm. also have the knob/rca but it's obviously been cut off $150...
Located in La grange, KY
Lindsey Smith
price-listed below
first up is the boost a pump, KB 20 amp. used it for about 2 years, has done it's job. i upgraded to a 40 amp for a twin cobra pump setup. Looking for $150 plus shipping
please note this system was installed pre-fpdm and the...
Jesse Leach is BACK
https://www.facebook.com/killswitchengage/posts/10150528798241581
"KILLSWITCH ENGAGE ANNOUNCE NEW SINGER: JESSE LEACH
HE SERVED AS BAND'S ORIGINAL SINGER ON LANDMARK ALBUM ALIVE OR JUST BREATHING
(New York, NY): Killswitch Engage are pleased to announce that they...
hey guys, painted bab, and the shaker has been plastidipped as it needed repainted. i have some home made brackets for a 2v on it. hood/shaker are in good shape, but all the tubing for the shaker is gone.
here's a few pics:
will sell hood/shaker together for $800 obo, or trade plus cash...
have some extra's i didn't need. Clamping range 3.0" to 3.3" (76mm to 84mm). I have 16 of them for sale. there's only 10 in the pic, i realize
will sell for $30 shipped obo.
bought them on ebay, attempted to get one or two to fit, ordered the wrong size. should fit just under 3" to 3.33" or so. I have 20 of them for sale, will sell all for $40 picked up
EDIT:I know there's only 10 of them pictured, just double it and you've got it right :)
around 90k miles, will be complete long block with intake manifold. will be coming out this weekend. i did have to helicoil front driver cylinder when it popped out a spark plug. i will video it running on the way to matt's house for proof it's running. doesn't appear to smoke upon startup that...
thinking about trading in my pickup for one to get better mileage. driving impressions, problems to look out for, happy with ride, drive, interior, etc?
bought em used and never put them on the new motor. does not come with gaskets, i have a set of bolts but it's missing 1 or 2 bolts or so, they'll come with it free.
$175 plus shipping.
would likely need re-coated or polished out pretty good. comes with a filter, but it's kinda rough too, but should work fine. Here's some pics:
$125 plus shipping from 40031. if you can paint or powdercoat it, you'll save $125 over a new one. off a 99-04 GT may fit other models not sure.
i know there have been beater threads, but show us your cheap ass beaters. unfortunately, i have a decent list, however, don't have any pics as they were not pic worthy.
-my first beater, 1991 nissan maxima SE 5 speed, 220 k miles when i bought it. had an angry stereo system which would pick...
Bought a shaker and put it on my 2v with a blower, don't need all the parts associated with it anymore.
I have basically all you'd need for the shaker assembly minus the shaker, and the main bracket that goes underneath the shaker, and the MAF. I will include the cast aluminum bracket though...
on my 00 gt with mach 460, i replaced the head unit with an alpine cda 9886. speakers sound like crap. not a big deal, planning on replacing them anyways at some point in the future. i have a couple component amps laying around i can use. i also have a 12" sub (JL 12w3v3-2) that will be going in...
ok guys and gals of donut shop (leo's only) got a bit of a dilemma. currently, i'm a parole officer in KY. been in this position for 2 years. worked as a c/o at a state facility for 2 years and did some fun stuff there (IA, STG, intake, etc...) and liked it alot. however, i'm considering going...
For Sale
Name:Lindsey Smith
Location (city, state):La grange KY
Items being sold:Mac longtubes and o/r h pipe
Price:350 plus shipping
Picture(s) of item:
Guys i'm doing a 2v motor instead of a 4v and just want an even trade. this is good for anyone looking to do a b-head swap. i'll...