vacuum

  1. D

    What is the ideal vacuum line to T into for recirculating/bypass valves on an 02 GT with a Voretch v3?

    Recently got my V3si kit installed on my 02 GT, however I need to finish it by T-ing the bypass valves into the vacuum system. I've seen people mention using the FRPS however I've also seen people leaning out their engines from vacuum leaks on that, so I'm curious if there's another I should be...
  2. D

    Vortech v3 installation on my 02 GT, not entirely sure how my PCV/Vacuum Lines should be connecting with the Aftercooler/Catch can

    Not quite sure how my PCV/Vacuum lines should be connected, even more so with my new catch can installed. Staring at these 20 year old manual photos for a while now, it seems like my IAC should connect to my inlet duct, and my PCV lines need to connect to the 2 plastic bungs at the end, but with...
  3. L

    EGR DELETE ISSUE

    Alright guys so i have a 2003 cobra, I went to delete my EGR from my car (the bracket on the side of the supercharger with the associated modules). Now when the car is under slight boost or any boost at low rpms the car will stutter almost like a misfire for a quick second. I have replaced the...
  4. A

    Oil Catch Cans

    were can i get some that are not 150 a pop. I have an 03 and think i need 3. Passenger side, Driver side to blower and then driver side to bottom intake. Am i accurate on that? Who can help. I don't care on the look just as long as it works. Any thoughts these were 3 i was curious about...
  5. johnny3gears

    Twin Turbo eboost2 Setup

    PREFACE- I am having trouble figuring out all the different vacuum distribution stuff for a turbo setup in general so any helpful links to that would be greatly appreciated. I bought a vacuum distribution block to help clean things up whenever I get it all figured out. This is for a 2011 5.0...
  6. that_guy20

    Boost gauge/vacuum hose routing

    hey everybody, i need help with my boost just to make sure i have the right hoses connected to the right place. does someone have a picture of what hose connects to the hose going to the boost gauge. From what i understand the boost gauge should connect to the single red hose coming from the...
  7. secretz

    vacuum hose leak/fuel smell

    I've got a 98 cobra that's recently got a leak somewhere in the vacuum hose. There's a massive smell of fuel when it's running. Not to mention, the whole inside of the car reeks of fuel if left over night. I've been looking for semi-easy solutions as to trying to remedy this issue. Is the...
  8. ian7654

    Strange starting problem

    Hey guys. I'm kind of new to this forum, and was wondering if anyone could help point me in the right direction on a starting issue I'm having. 1996 Cobra, 65,000 miles - If the engine is cold she starts right up. However, if it's a particularly hot day and the car has been sitting on...
  9. M

    Vacuum/boost routing

    Hey Guys, I need to figure out where to run my vacuum lines on my 03 cobra into a 98 cobra swap. I've deleted the EGR from the driver side and unwrapped the vacuum tree with the intention of removing stuff I don't need. So ultimately there's 2 lines that come off the bottom boost port...

Top