Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
The Terminator
Terminator Talk
Low and High Speed Cooling Fan Tempatures
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="LargeOrangeFont" data-source="post: 6664943" data-attributes="member: 22835"><p>The thermostat is under the car, right off the radiator outlet.</p><p></p><p>Before you do ANYTHING make sure you can remove the plug in the coolant cross tube.</p><p></p><p>Remove the 2 screws in the thermostat housing and the coolant will drain out. Then open the housing and remove the thermostat. Be aware more water may come out if you did not let it drain long enough. Drill it and reinstall the thermostat in the housing, and bolt the housing together.</p><p></p><p>Fill the radiator from the coolant tank until it gets to the full line, and put on the cap.</p><p></p><p>Top off the coolant from the crossover tube. When it is full replace the plug and finger tighten it, or SLIGHTLY more.</p><p></p><p>Fire the car and let it warm up amd make sure the car is burped. It should be good or very close if you filled it how I described.</p></blockquote><p></p>
[QUOTE="LargeOrangeFont, post: 6664943, member: 22835"] The thermostat is under the car, right off the radiator outlet. Before you do ANYTHING make sure you can remove the plug in the coolant cross tube. Remove the 2 screws in the thermostat housing and the coolant will drain out. Then open the housing and remove the thermostat. Be aware more water may come out if you did not let it drain long enough. Drill it and reinstall the thermostat in the housing, and bolt the housing together. Fill the radiator from the coolant tank until it gets to the full line, and put on the cap. Top off the coolant from the crossover tube. When it is full replace the plug and finger tighten it, or SLIGHTLY more. Fire the car and let it warm up amd make sure the car is burped. It should be good or very close if you filled it how I described. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
The Terminator
Terminator Talk
Low and High Speed Cooling Fan Tempatures
Top