Aftermarket and OEM - Engine Parts, Tools, Pulleys, SC Belts

[lucheski]

Two Eibach/UPR Springs for coilovers
* 12" Tall
* 250# Spring Rate
67 shipped for pair

MAC Offroad Prochamber for Longtubes 157 shipped (77 picked up) SOLD

OTC Valve Spring Compressor 57 shipped (over $120.00 new)

IRS Diff Cover 37 shipped

30 Lifters aka hydraulic lash adjusters 37 shipped

Complete Cam gears set 50K miles 37 shipped

15 intake valves 37 shipped

16 Exhaust valves 37 shipped

Metco stock-sized lower pulley 67 shipped
Black/Grey BF 2.76 pulley ring 57 shipped
Gates Belts Excellent condition 17 shipped each
Pulley Cover 37 shipped
K080797
K080776 (New BNIB)
K080765 SOLD
K080740
OEM Shifter for T-56 17 shipped SOLD

Stock Caged Lower Pulley 77 shipped SOLD

Stock 03 Cobra Balancer - had chunks missing long as i can remember and has worked fine for years - 67 shipped

Four 17in x 9in Cobra Wheels! 247 plus shipping for the set!

2 Ton Folding Cherry picker w/ load leveler and chains 147

1500lb Torin Engine Stand (used once!) 77

Tranny Jack 47

 

[danielson631]

might be a silly question but the prochamber would work with 96-98 cobra mac longtubes, right?

for some reason i thought i remember someone saying i couldnt pair the two together


best price shipped to 11722?

 

[Demonio]

Would you do 50 shipped for the stock lower ring? And question, can you install the motor from the top in the engine bay with long tube headers or does it need to go in from bottom?

 

[lucheski]

might be a silly question but the prochamber would work with 96-98 cobra mac longtubes, right?

for some reason i thought i remember someone saying i couldnt pair the two together


best price shipped to 11722?

It will work on 99 - 04 GTs and Cobras with Mac Longtubes

I just checked the part numbers for the offroad prochamber are different for the 96 - 98s

I am sure you could probably modify it to work. I am guessing shipping would be about 75 due to the size, Im not a business so I don't get any discount when I need to ship

 

[lucheski]

Would you do 50 shipped for the stock lower ring? And question, can you install the motor from the top in the engine bay with long tube headers or does it need to go in from bottom?

Sorry I can't go that low, I already marked it down. It has only 800 miles or so on it and I might need it when I go to a bigger blower.

Yes you can go from the top...I went in from the top with the headers attached, if I had to do it again I would go from the bottom!!

 

[autosay97]

I will take the lower pulley. PM sent.

 

[Primera_Espada]

Would the prochamber work with mac longtubes on a 03 mach 1? If so can u quote me on the shipping to 32720, thanks.

 

[lucheski]

Would the prochamber work with mac longtubes on a 03 mach 1? If so can u quote me on the shipping to 32720, thanks.

yes, I will ship it for 75, lmk

 

[lucheski]

caged lower and oem shifter is sold!!!

 

[Primera_Espada]

$75 with shipping.... Deal, I just pm'd you.

 

[lucheski]

$75 with shipping.... Deal, I just pm'd you.

The packing/shipping alone will be around 75

77 plus 75 = 157 shipped

that's still about 1/2 what a new one costs let me know...

 

[mikesyellocobra]

could you quote shipping on the wheels to 85369?

 

[BuckChoklit]

I see the first picture of the wheels has an actual SVT center cap, and the others don't. Are these OEM?

 

[lucheski]

I see the first picture of the wheels has an actual SVT center cap, and the others don't. Are these OEM?

The wheels are OEM and will come with the ZR caps, SVT center caps are being used for my new wheels.

 

[lucheski]

Ttt

 

[lucheski]

ttt

 

[lucheski]

ttt