2013 DIB 5.0 Pics (Finally Lowered)

kcsvt94l

1D 10 T Error
Established Member
Joined
Feb 14, 2007
Messages
1,755
Location
Kansas City, MO
Finally found time to get some parts installed! and MAN does it handle!

H&R Super Sport Springs (1.7 front 2.4 Rear)
Tokico D-Spec Adjustable Shocks/Struts
J&M Adjustable Panhard Bar
J&M Lower Control Arms
BMR Lower Control Arm relocation brackets
JPC Adjustable Upper Control Arm
GT500 Strut Mounts

photo35p.jpg

photo33u.jpg

photo32l.jpg

photo31s.jpg

photo29kj.jpg
 

kcsvt94l

1D 10 T Error
Established Member
Joined
Feb 14, 2007
Messages
1,755
Location
Kansas City, MO
Right now I'm only 3 turns from full hard it's deff rough on some big bumps. I may go 1 or 1.5 turns out and see how it feels. Certainly said **** you to body roll in the twisties, noticing recaro's would be great right about now. LOL!
 

04svtterm

Active Member
Established Member
Joined
Aug 8, 2008
Messages
1,777
Location
Houston, TX
Love the height...but the wheels kinda got me scratching my head. I know everyone has different taste...but damn lol
 

scott_0

Well-Known Member
Established Member
Joined
Jul 30, 2011
Messages
4,337
Location
Pa
are you using camber bolts with the gt500 mounts? you dont seem to have an excessive amount of negative camber
 

kcsvt94l

1D 10 T Error
Established Member
Joined
Feb 14, 2007
Messages
1,755
Location
Kansas City, MO
I bought them should they be needed. I was quite surprised I would be able to lower the car that much and stay in spec. I did have toe out on my Driver front wheel, that was easily corrected. Outside of that it was just getting the pinion angle right and adjusting the panhard bar.

These cars are really quite easy to do suspension work on (Granted it is practically brand new) a 1/2 drive 18V Impact, 18-22 MM impact sockets and a ft/lbs Torque wrench capable of 130+ makes this job a piece of cake.
 

Oman_cobra

New Member
Established Member
Joined
Oct 8, 2005
Messages
2,517
Location
Oman
looking sharp, before i didn't like these wheels but your car is showing them nicely
 

Users who are viewing this thread



Top