This is my fathers personal car. He has had it for 2 years, and he needs to sell to help with his new business.
2003 SVT Cobra 10th Anniversary Convertible
Bought the car with 19,000 miles on it
Now it has,36,365 Miles- could change until sale
Manufactured 7/14/2003,#4783 of 5082 made with all documents of authenticity .
TONS of receipts for the modification on this car!
Modifications included:
Suspension:
Full Maximum Motorsports front end kit:
- * MM K-Member
* MM Front Control arms
* MM Front Coil-Over Conversion kit
* MM Aluminum Steering Rack Bushings
* MM Caster/Camber plates
* MM Adjustable Tie-Rod Ends
* MM 2-Point K-Member Brace
* Urethane front swaybar bushings
* Swaybar end links (shorter)
* MM Front Swaybar Relocation Kit
* Strut Tower Brace
* Oil Relocation Kit
Full Welded Maximum Motorports Ladder SFC
4 point roll bar- bolted in
Stock IRS, billet flow rear diff brace and bushings with H&R Race springs.
The factory 10th Ann wheels have been cut, widened and welded to a 17x10.5inch wheel.
Go fast:
Steeda cold air intake
Borla catback with Spintech mufflers welded in
LFP dual pass heat exchanger
Stegemier installed and tuned 2.96 upper pulley producing 456 hp and 463 Lb/Ft on Stegemiers Dyno- Have charts
Misc:
MGW Short Shifter
Tremec White Ball Shift knob
HID from Amercianmuscle.com
Car is in great shape! Pulls hard, and handles like a sports car!
24,500 is the price.
Please call Al at 314-568-2009
More pictures to come!
2003 SVT Cobra 10th Anniversary Convertible
Bought the car with 19,000 miles on it
Now it has,36,365 Miles- could change until sale
Manufactured 7/14/2003,#4783 of 5082 made with all documents of authenticity .
TONS of receipts for the modification on this car!
Modifications included:
Suspension:
Full Maximum Motorsports front end kit:
- * MM K-Member
* MM Front Control arms
* MM Front Coil-Over Conversion kit
* MM Aluminum Steering Rack Bushings
* MM Caster/Camber plates
* MM Adjustable Tie-Rod Ends
* MM 2-Point K-Member Brace
* Urethane front swaybar bushings
* Swaybar end links (shorter)
* MM Front Swaybar Relocation Kit
* Strut Tower Brace
* Oil Relocation Kit
Full Welded Maximum Motorports Ladder SFC
4 point roll bar- bolted in
Stock IRS, billet flow rear diff brace and bushings with H&R Race springs.
The factory 10th Ann wheels have been cut, widened and welded to a 17x10.5inch wheel.
Go fast:
Steeda cold air intake
Borla catback with Spintech mufflers welded in
LFP dual pass heat exchanger
Stegemier installed and tuned 2.96 upper pulley producing 456 hp and 463 Lb/Ft on Stegemiers Dyno- Have charts
Misc:
MGW Short Shifter
Tremec White Ball Shift knob
HID from Amercianmuscle.com
Car is in great shape! Pulls hard, and handles like a sports car!
24,500 is the price.
Please call Al at 314-568-2009
More pictures to come!
Last edited: