WTT built Fox(plus cash) for Termi-------SOLD!
CAR HAS BEEN SOLD!!!!
I'm listing for a friend. He's looking to trade his Fox (plus cash) for a Terminator. If you're interested in a trade deal just post up what you have.
Drivetrain
- It's a stock block bored .030 over, stock crank and rods, speedpro pistons
- afr185 heads with upgraded comp cam 977 springs and heads stud girdles
- port matched Holley systemax intake
- comp cam xe274 hr cam
-comp cam lifters #851-16 and the comp cam hardended pushrods
Power adder
- Paxton novi 2000, that I put on march of this year.
- I have the stock pulley and one thats a little smaller.
- 42lb injectors
-Upr powerpipe
- Vortech Maxflow bypass valve
- Accufab 90 to 75 mm throttlebody
Suspention
eibach pro springs with new shocks
- maxum motorsports lower control arms
- welded sub frame connectors
Transmission
- I had ford build my aod with 4r70w internals
- tci hardened input shaft,
- edge pro racing converter 3600 stall
- B&M hammer shifter
- PA manual valve body with a trans bake and electric O/D
- Bigger aluminum trans pan
- huge trans cooler
- Aluminum driveshaft
- Royal purple trans fuid
- 15" weld draglite wheels 15x3.5 skinnies up front 15x8 with 275x50 Mickey thompson drag radials on the back
The trans drives great on the street and cruises on the freeway all day long.
Interior
- it had blue interior and I've converted about 90 % to black, black dash and center console out of a 91
- new black carpet
- new black hunsaker racing seats
- Autometer monster tach
- Autometer boost gauge
- AEM wideband
- Autometer trans temp
- It has frpp 3.73 Gears
- 255 fuel pump
- new aeromotive fuel rails and fpr part #aei-14102 about 2 months ago
- bran new pro-m 92mm mass air with about 100 miles on it
- New fluidyne 3 core rad with a flex-a-lite elec fan and custom shroud set up on an ajustable thermostat.
New boss Inc hood just painted in July of this year
- clear headlights
- MSD 6AL
- MSD wires
- MSD blaster 3 coil
- MSD cap and rotor
- Autolite 3923 plugs
I'm probably forgetting a couple little things, If you have any questions please call/ text or email. Nick 801-842-7027 [email protected]n 8 psi it made 465hp 430 tq heatsoaked...
Video
CAR HAS BEEN SOLD!!!!
I'm listing for a friend. He's looking to trade his Fox (plus cash) for a Terminator. If you're interested in a trade deal just post up what you have.
Drivetrain
- It's a stock block bored .030 over, stock crank and rods, speedpro pistons
- afr185 heads with upgraded comp cam 977 springs and heads stud girdles
- port matched Holley systemax intake
- comp cam xe274 hr cam
-comp cam lifters #851-16 and the comp cam hardended pushrods
Power adder
- Paxton novi 2000, that I put on march of this year.
- I have the stock pulley and one thats a little smaller.
- 42lb injectors
-Upr powerpipe
- Vortech Maxflow bypass valve
- Accufab 90 to 75 mm throttlebody
Suspention
eibach pro springs with new shocks
- maxum motorsports lower control arms
- welded sub frame connectors
Transmission
- I had ford build my aod with 4r70w internals
- tci hardened input shaft,
- edge pro racing converter 3600 stall
- B&M hammer shifter
- PA manual valve body with a trans bake and electric O/D
- Bigger aluminum trans pan
- huge trans cooler
- Aluminum driveshaft
- Royal purple trans fuid
- 15" weld draglite wheels 15x3.5 skinnies up front 15x8 with 275x50 Mickey thompson drag radials on the back
The trans drives great on the street and cruises on the freeway all day long.
Interior
- it had blue interior and I've converted about 90 % to black, black dash and center console out of a 91
- new black carpet
- new black hunsaker racing seats
- Autometer monster tach
- Autometer boost gauge
- AEM wideband
- Autometer trans temp
- It has frpp 3.73 Gears
- 255 fuel pump
- new aeromotive fuel rails and fpr part #aei-14102 about 2 months ago
- bran new pro-m 92mm mass air with about 100 miles on it
- New fluidyne 3 core rad with a flex-a-lite elec fan and custom shroud set up on an ajustable thermostat.
New boss Inc hood just painted in July of this year
- clear headlights
- MSD 6AL
- MSD wires
- MSD blaster 3 coil
- MSD cap and rotor
- Autolite 3923 plugs
I'm probably forgetting a couple little things, If you have any questions please call/ text or email. Nick 801-842-7027 [email protected]n 8 psi it made 465hp 430 tq heatsoaked...
Video
Last edited: