1990 LX Hatch 5.0/5 speed with new paint and lots of extras 90k miles

Nutty 5.0

Well-Known Member
Established Member
Joined
Dec 17, 2006
Messages
2,086
Location
SE Pa
Sold

  • 1990 Mustang LX 5.0 with original 5 speed: 90000 miles with clean and clear title in my hands. The car drives perfect and solid with no driveability issues that some head/cam/intake cars are plagued with. It is rust free throughout and factory undercoatedcar. It had some front end damage earlier in its life that was repaired properly and the car is straight. I’m only selling the car as it’s hard for me to drive and looking to get into a new Mustang to replace this with. I have lots of pictures documenting all of the car and work that was done to it. Car is located in Reading, Pa.

    List below of what’s been done and I’m sure I’m missing some things:

    · New paint with new Cervini’s 2.5” cowl hood

    · All new interior: headliner, seat covers, map pockets, mass back carpet, hatch carpet, sunvisors etc. Dynamat throughout interior.

    · New CF clutch with new Ford Racing clutch fork, adjustable cable, TOB and pilot bearing. Steeda firewall adjuster. New rear main and new Aluminum flywheel installed.

    · New Mac 2.5” cat back with Mac prochamber. BBK Equal length headers.

    · New brakes (rotors, pads, drums, shoes and hardware) all around with braided brake lines and MM caliper sleeves

    · New Kumho tires with alignment done Aug. 2017

    · New Pa Inspection good through July 2018. Currently has Pa Classic Tag

    · New coil spring isolators with Bullitt springs all around. Rear adjustable height control arms, new power steering pump, Steeda bumpsteer kit, UPR caster/camber plates, Steeda front sway bar and brackets, new Strange front struts, KYB rear shocks

    · New Sony Media player with all new speakers

    · New exterior trim and gaskets

    · Prothane motor and transmission mounts

    · Recent Ford Racing 3.73’s with extra clutch pack per side

    · Trans was just rebuilt by Hanlon less than 500 miles ago; steel input shaft, Pro 5.0 shifter

    · Engine: Edelbrock Performer 5.0’s with 1.90’s, Comp Cam, Cobra intake, 65mm TB, 76mm Mass Air.

    · New aluminum radiator

    · 3G 95 amp alternator conversion with fused 4 gauge feed. Battery was new March 2017

    · New power locks and driver window motor

    · New Taylor 409 wires, cap and rotor

    · New smoked headlights

    $10,000 OBO
    img_5392-jpg.587649
    img_5390-jpg.587650
    img_5389-jpg.587651
    img_5386-jpg.587652
    img_5382-jpg.587653
    img_5381-jpg.587654
    img_5380-jpg.587655
    img_5378-jpg.587656
    img_5376-jpg.587657

    View attachment 878833
 
Last edited:

ITSTOCK

Well-Known Member
Established Member
Joined
Sep 9, 2004
Messages
1,783
Location
wv
Message sent, I'd like to come look at it Saturday if possible.
 

Users who are viewing this thread



Top