Just got a 97 Cobra, and the h/u was pretty old and needs replaced. It currently has the mach 460 factory amps unhooked and 2 aftermarket ones installed, 1 for a "10 JL sub and the other for the front and rear speakers. Because of the aftermarket h/u it already has the ford harness there.
Here is my question, according to these two pics what wires should match up. The first is the new harness with the new pioneer DEH-X6900BT. The next is the harness from the current kenwood h/u. I understand the black, red, and yellow wires match up, but what about the 3 wires.
Sent from my SM-G930P using the svtperformance.com mobile app
Here is my question, according to these two pics what wires should match up. The first is the new harness with the new pioneer DEH-X6900BT. The next is the harness from the current kenwood h/u. I understand the black, red, and yellow wires match up, but what about the 3 wires.
Sent from my SM-G930P using the svtperformance.com mobile app