FERRARO SPEED –
2010-2014 Mustang AC Vent nGAUGE Mount
2. Insert the rear Ferraro Speed JRP bracket in the back of the AC Vent.
View attachment 86256
3. With the Ferraro Speed JRP Rear Bracket installed from the back of the driver side AC vent, now mount the Ferraro Speed JRP Front Bracket from the front of the AC vent onto the Ferraro Speed JRP Rear Bracket.
View attachment 86248
View attachment 86253
4. Mount the Ferraro Speed JRP Front Bracket to the nGAUGE Mounting Cup. Ensure the larger wedge of the Ferraro Speed
View attachment 86255
View attachment 86254
5. Install AC Vent install the dash bezel.
View attachment 86252
6. Before installing the Dash Bezel Back into the car. Block off the AC duct. Drill a hole in the side of the factory AC cup to run the nGAUGE cable through. Install Dash Bezel back into the car.
View attachment 86247
2010-2014 Mustang AC Vent nGAUGE Mount
- Ferraro Speed – 2010-2014 Mustang nGAUGE driver side AC Vent Mounting Bracket
2. Insert the rear Ferraro Speed JRP bracket in the back of the AC Vent.
View attachment 86256
3. With the Ferraro Speed JRP Rear Bracket installed from the back of the driver side AC vent, now mount the Ferraro Speed JRP Front Bracket from the front of the AC vent onto the Ferraro Speed JRP Rear Bracket.
View attachment 86248
View attachment 86253
4. Mount the Ferraro Speed JRP Front Bracket to the nGAUGE Mounting Cup. Ensure the larger wedge of the Ferraro Speed
View attachment 86255
View attachment 86254
5. Install AC Vent install the dash bezel.
View attachment 86252
6. Before installing the Dash Bezel Back into the car. Block off the AC duct. Drill a hole in the side of the factory AC cup to run the nGAUGE cable through. Install Dash Bezel back into the car.
View attachment 86247