Recent content by 006

Questions: What brand of O2 sensors are on the vehicle right now? You mentioned the exhaust temps pre and post cat being 50 deg different. This could be due to a fuel mixture and depending on what brand of sensors you have, it could eventually lead to clogged cats. Does the vehicle have a tune...

Beautiful! Still want a lift in my garage :(

I recall someone unplugging the sensor and wrapping it up with foam padding of some sort and leaving it in the valley. There was no mention of any CEL codes. If anyone needs a referral to a tuner who knows how to turn the KS off, let me know and I will post his link/info.

At the lip. Correct! The Mach 1 alt pulley is larger than the 96-98 and 99-01 cobra. Also, the Mach alt uses a "clutch" type pulley, while ours are a slide in and bolt up. I know it's not much, but I was offering a 3.2" (lip) and 2.95" (ribs) pulley to help alleviate the possible over-spinning...

That's about right. 2.48" is what they measure at. Not sure what else your issue could be, but if you can't solve it with all the other fixes, I might recommend seeing if someone local with a 99-01 can swap their alt with you and see if the problem disappears. Can you datalog?

Did you measure? If your alternator pulley is smaller than stock, it overspins at higher RPMs and voltage begins to cut out. This causes the vehicle to hesitate at higher RPMs. My question was a serious one.

You mentioned a new alternator. Did you reuse your stock/factory alternator pulley or are you using the one that came with the replacement? Check the diameter of the alt pulley and measure it from lip to lip and give us your measurements. Also, do you have aftermarket accessory pulleys?

It's most probably a voltage problem. Check your alternator pulley. If it's smaller than your original one, the alternator is over spining and causing the voltage to cut out at higher rpms. Also, if the alternator is not suited for your vehicle, you may experience this as well. Your stock...

3 possible cuplrits (from my personal experience). I chased a low rpm hesitation for a few years. 1. EGR (not likely) 2. EGR vacuum solenoid (VERY likely) http://www.ebay.com/itm/96-97-98-MUSTANG-COBRA-EGR-VACUUM-SOLENOID-NICE-USED-/111445019766 I would not buy a used one.. this is something...

This shit piece of ****ing contraption almost got my kids and I killed. If you reside in a non-emission nazi state, do yourself a favor and eliminate the EGR and DPFE...and get it tuned accordingly. If you reside in a regulate your ****ing balls state such as Kalifornia, be aware that a...

Lowered price $100 shipped

SOLD!! Thanks SVTP! $80 Shipped Don't need this anymore. Original equipment on 2011 Mustang SVT Fits all 8.8" Ford rear end (SRA) Cooling ribs reduce gear oil temperature Will not fit IRS

SOLD!! Thanks SVTP! They seem to sell for $150 shipped for a used set. ..but I'll take $135 shipped. Will also consider trading for an OEM set in fairly good condition as well, add $95 and they're yours (send me some pics) They are not perfect, but in fairly good condition. HOLY...

Moved to new sale post: http://www.svtperformance.com/forums/engine-drivetrain-256/958160-aluminum-rear-8-8-girdle-cover-ford-racing.html :)

GOT WHAT I NEED. THANKS SVTP!! .... . . . . . . .. . PM me what you have. p.s. If anyone has a single driver's side coil cover (cop), that would be all I need, but if you have a set at a good price, shoot me a pm. Thanks! :rockon: