Stock swaybar from my 01', had 60k miles when removed.... has the bolts etc except the brackets that were mounted to the truck.
$80... would prefer local pickup if not buyer pays shipping.
welll seems as though last night the dash(speedo/tach area) began flickering and eventually just stopped lightning up. So it was a pain driving anywhere last night having to turn on the cab light to check speed etc. Anyone else had this happen? Everything else lights up when I turn on the...
As the title says...comes with all mounting hardware/brackets/shocks keys for the locks etc. It is oxford white.... here it is.(excuse the gay antenna..... it came off shortly after that picture, lost mine on the way up to bts and needed a radio to cruise through the mountains lol and was the...
P1450 - Unable to Bleed Up Fuel Tank Vacuum Monitors the fuel vapor vacuum and pressure in the fuel tank. The system failure occurs when the EVAP running loss monitor detects excessive fuel tank vacuum with the engine running (but not at idle). Blockages or kinks in EVAP canister tube or EVAP...
P1450 - Unable to Bleed Up Fuel Tank Vacuum Monitors the fuel vapor vacuum and pressure in the fuel tank. The system failure occurs when the EVAP running loss monitor detects excessive fuel tank vacuum with the engine running (but not at idle). Blockages or kinks in EVAP canister tube or EVAP...
Big air 2600 with aluminum adapter.... ended up not needing it, brand new in the box. Same as below:
SCT BA-2600 90mm MAF Meter with Aluminum Housing **NEW** [BA-2600] - $264.95
$215 +shipping
Stock 90mm MAF $60 shipped
Big air 2600 with aluminum adapter.... ended up not needing it, brand new in the box. Same as below:
SCT BA-2600 90mm MAF Meter with Aluminum Housing **NEW** [BA-2600] - $264.95
$225+the ride.
Also have a stock 90mm Maf for sale... $60 shipped or o.b.o.
Big air 2600 with aluminum adapter.... ended up not needing it, brand new in the box. Same as below:
SCT BA-2600 90mm MAF Meter with Aluminum Housing **NEW** [BA-2600] - $264.95
$225+the ride.
Brought the codes up on the xcal after throwing a CEL.......Any help?? Where is it located?? HELP!! :(
p1000-check of all obdII codes not complete
p1504-intake air control circuit malfunction
p1506-idle air control over speed error
From the looks of it seems as though the I had the crank snap on me..... half throttle let out of it in traffic and got about 1/2 down on the throttle and the truck just died. Opened the hood to see the blower belt missing and pulled on it only to hear something moving.....daylight showed the...