52merc's latest activity

Motorcraft STP-30-RM. Rockauto should have it. It is a remanufactured unit as that is all Motorcraft now offers.

Probably oil cooler.

See my Post #25.

Without pulling apart my car I'm not sure I can offer you much more help. I believe Item 3 in the bottom frame labeled "engine control...

Here is my picture. I believe C139 is inside the protective sleeve.

I believe that is inline connector C139. It matches the pinout positions in the picture. Pin-1 is BK (Black) Crankshaft Position Sensor...

Cranking at WOT will prevent the injectors from firing. I have needed to do this on occasion with my '01 if it stalls after a cold...

I think you are mistaken. The connector in Picture #5 appears to be an 8-way. The knock sensor connector is similar in design and looks...

Yes, driver side off the firewall.

I installed the FTBR setup a few years ago. I would definitely recommend the whole package. Here is a picture of the assembly ready to...

That silver disc is a fuel pressure damper. Here is a good picture.

Picture 5 has a black 8-way connector in your hand. If it has 4 wires going to it (BK/PK, DG/OG, LG/WH, and YE/WH) then it is inline...

The PCM uses the front O2 sensors to control the fuel being injected into the engine. The rear O2 sensors are used to monitor the...

The only 2 green EPC connectors I have information on are the front oxygen sensors and the only true way to determine left from right is...

"F" I believe is the EVAP cannister purge line. Here are the pictures from my car.