Recent content by 90FoX

Hi everyone, Was hoping for some help with a weird problem I encountered yesterday. I have a 1996 cobra (all stock) and drove it around for some errands yesterday hit a couple stores and returned home. It was hot out about 90 degrees. I heard some weird noises from the car after parking at...

Hello, I was hoping y'all could help me figure out what's happening with my oil pressure gauge please? I was at the light the other day when I noticed the gauge moving around. It was only doing this at idle. Here's a link to the video I was able to capture: https://vimeo.com/137334318...

Looking to buy a flawless, like new condition hvac control panel for a 90-93 mustang with a/c. Please let me know what your looking to get for it. Scratched the crap out of mine accidentally and it was perfect :nonono::cuss: Thanks :beer:

Hey guys, I was wondering if I should run a inline fuse before or after a relay for one of my mobile electronics? My understanding was that the relay acted as a fuse as well as a switch. :confused: Thanks for your input :cheers:

Was searching for some info on installing my battle boxes and ran across this: http://www.svtperformance.com/forums/mach-1-156/604360-mach-1-rear-end-build-up-pics.html If you scroll down you can see the guy used aluminum foil to cover the fuel lines and brake lines. I searched google and I...

What's up guys? Not sure where this belongs but there is a lot of good knowledge in this section so I figured I'd post it here: I have an adjustable clutch cable and the threads where the cable attaches to the clutch fork are screwed up bad. Now I have tried researching and can't...

What's up you guys? Did some research and couldn't find much on the info I need, hoping you guys can help me out. 1) People say you can damage your alternator and car's computer if you weld on your cars chassis/body. What do you recommend I do to prevent this? I've heard that I should...

Opinion about IRS Swap (12mm vs 14mm lca bolt) What's your opinion on leaving the RLCA torque box holes and bolts 12mm vs drilling and using the 14mm bolt for the IRS? I know I can find a bushing/crush sleeve for the front IRS sub frame mount to keep my 12mm bolt without having to drill out...

I'm looking for feedback from people who have a hurst shift stick similar to this one: My question is how did this work with your stock shift boot? Did it work at all and if it did work, did you modify your stock shift boot? Is there an adapter I need to help make it work with my shift...

What's up y'all? Like the title says looking for Stock Uncut springs from a 2003 or 2004 cobra COUPE. LMK what ya have and what your looking to get for them. Not interested in springs from a convertible. Thanks :beer:

Just picking up some stock 03 cobra springs for the 96. I plan to cut the front maybe 3/4 coil and rear 1/2 coil. My question is how low can I drop the car without needing c/c plates? I don't mind a negative .5 or 1 degree camber but anymore than that I wont be happy. You think I can...

About to start an IRS swap on my 1996 mustang and wanted to know if anyone has been able to fully eliminate wheel hop. I'm talking about after the FTB bushing kit and subframe connectors. I've seen a lot of conflicting information in my searches so I thought I would start a thread to see if...

Hey, I'm putting together an IRS and need a diff cover brace or an aftermarket cover like the one from LPW or FORE. LMK what ya got. Thanks :beer:

Took the car to a tire shop to repair a nail in my tire and the jack they used to jack up the car bent my pristine pinchwelds :nonono::fm: So I wanted to know should I straighten this out? Bending metal back and forth will weaken it so I don't know if I should just leave it. The reason I...

Looking for a diff housing for a 99+ cobra irs. I would like to find one in good condition not broken/damaged. I would prefer it to just be just the housing,cover and pinion flange. I don't need the carrier or gears. LMK Thanks :beer: