I recently bought my 98 cobra back from the guy I sold it to. I don't think he ever changed or added oil to the Kenne Bell. Pulled the dip stick and it is dry and caked with burnt oil. I pulled the blower and the drain plug. Barely any oil came out. What did come out wasn't discolored...
I recently bought my 98 cobra back from the guy I sold it to. I don't think he ever changed or added oil to the Kenne Bell. Pulled the dip stick and it is dry and caked with burnt oil. What can I use to safely it flush out? I have plenty of oil to run though it once I get it clean. All help is...
1998 Kenne Bell Vert 63,000 miles
1998 Cobra convertible with around 63,000 miles. Black body with tan top. Black and tan interior. Motor rebuilt at 61,000 with forged internals.
I am the second owner and I bought the car in 2003 with 12,700 miles and completely stock. Car is garage kept and...
1998 Kenne Bell Cobra convertible 63,000 miles
1998 Cobra convertible with 63,000 miles. Black body with tan top. Black and tan interior. Motor rebuilt at 61,000 with forged internals.
I am the second owner and I bought the car in 2003 with 12,700 miles and completely stock. Car is garage...
i have a 98 cobra and am wondering what transmissions are a direct replacement to the stock t-45? the year/make of the car that the tranny comes in would help as well. thanks.
Justin
i am currently building a 95 gt twin turbo for street/strip. the car came with 5 point harness's and no stock seat belts. will the harness's be good for state inspection or do i need to have regular seat belts as well. thanks for your time and stay safe.
Justin
i have a 98 cobra with a 1.5 ltr kenne bell. made the numbers in sig with a stock motor. since then i have had the motor rebuilt with stock length rods and 5cc dish pistons. i added long tube headers as well. heads and cams have not been touched and are stock. the 6 psi pully was 3.25 inches. i...
i have a 98 cobra with a 1.5 ltr kenne bell. made the numbers in sig with a stock motor. since then i have had the motor rebuilt with stock length rods and 5cc dish pistons. i added long tube headers as well. heads and cams have not been touched and are stock. the 6 psi pully was 3.25 inches. i...
2 questions. where did those of you running meth injection tap in for power. if you happen to have a pic, that would be even better. second, the yellow wire is used to run the kit off the maf but it doesn't tell me which wire to tap for the signal. this is on a 98 cobra. any help would be great...
meth install ?'s
2 questions. where did those of you running meth injection tap in for power. if you happen to have a pic, that would be even better. second, the yellow wire is used to run the kit off the maf but it doesn't tell me which wire to tap for the signal. any help would be great...
just curious if Virginia law requires you to put the front plate on the bumper or if i could put it in my windshield. thanks for the help in advance.
Justin