AnarchyVA's latest activity
-
AnarchyVA replied to the thread Bottoming out at highway speeds.I've done two things that I hope will mostly take care of my problem. The convertibles have an X brace under the oil pan that the... -
I have an 03 cobra with H&R race springs, and a 15 gt with eibach sportlines. Both will bottom out hard on these transitions on the...
-
AnarchyVA replied to the thread Bottoming out at highway speeds.Thats my problem right now. I can handle the speed bumps and the occasional pothole. But those transitions are just terrifying! It...
-
AnarchyVA reacted to cobracide's post in the thread Back in a 03 Cobra again! A few questions with
Like.
-
AnarchyVA reacted to NewToFord's post in the thread Back in a 03 Cobra again! A few questions with Like.
I’m in southbury. I don’t have any great pics right now because I just got the car, and the weather isn’t cooperating. This is it...
-
AnarchyVA reacted to TP03's post in the thread Fix/Replace Damaged Wiring from Fuel Pump Harness to OEM Hat with Like.
That's a tough one. If you can't figure out how to unpin the connector, I would just cut wire on the bad spot. Slide a piece of this...
-
AnarchyVA replied to the thread Fix/Replace Damaged Wiring from Fuel Pump Harness to OEM Hat.I'm going to try to unpin the connector. The thing about soldering is I'm horrible at it. I've practiced so many times. Watched so...
-
AnarchyVA posted the thread Fix/Replace Damaged Wiring from Fuel Pump Harness to OEM Hat in Terminator Talk.Has anyone ever fixed or replaced the wiring running from the OEM fuel pump wiring to the OEM fuel pump hat? The best way to do this is...
-
-
Has anyone ever fixed or replaced the wiring running from the OEM fuel pump wiring to the OEM fuel pump hat? The best way to do this...
-
-
AnarchyVA replied to the thread Engine cooling fan recommendations.I have spent the past several months working on a blower swap. In the process I installed the fan from a 97 Mark VIII. I had to mock...
-
AnarchyVA replied to the thread Tool for coolant refill with vacuum.I have the tool. And it works great. Like MOST tools....they don't make an impossible job possible. They make a possible job easiER.
-
AnarchyVA reacted to papajoewill's post in the thread Tool for coolant refill with vacuum with Like.
It's not about money but I'll go ahead and send you my banking details to send that measly 20k if it's no big deal to you....
-
AnarchyVA reacted to papajoewill's post in the thread Tool for coolant refill with vacuum with Like.
I just got a new engine from MHS and don’t want to question any air pockets or the process in general. What’s 100ish bucks for peace of...
-
AnarchyVA replied to the thread Who’s drained fuel from a return system.I connected a pump to the fuel pump line and hand pumped it empty.
-
AnarchyVA replied to the thread WANTED: WTB a couple of stock parts….I have stock elbow, throttle body, injectors, and fuel pumps.
