Recent content by hostilewes

So I have looked at several stoker kits for a DOHC 4.6, is a 5.0 kit going to be as big as it gets for these motors?

MJ had made it in about 5 threads so far.

So Yuck

Last year I went to an open road event where we had the opportunity to “legally” take our cars out on a straight long section of road and make top speed runs. Many cars ran well over 200mph. There were several mustangs at the event. I have noticed in my car, at about 150-160 it wants to take off...

I sold my 90 turbo Notch and i miss it. I am tossing around the idea of traiding for a another clean notch. The car has 110K miles and drives perfect. Motor and Pro Charger about a year old. Kandy paint is two years old. Other details apon request if intrested. More info from questions i have...

So I have taken an interest in road racing since I sold my turbo hatch I had as a drag car. Are there any road racers in the forums that I could ask some questions to or any one in the south east I could go to some races with and help out to learn from on where to get started? I have been doing...

So my 99 Cobra has developed an issue. I try to make it short and hope someone has an idea. My dash light and all my backlighting has been going in and out. Now it has quit working all together. Some one suggested to check the little blue wire coming out of the light switch and I have power...

Can Someone delete this thread, i have it posted two time some how!

I needed to make some changes to my system. The intercooler had to come down and i put the BOV"s in the fog ligh holes since i had to ditch the lights and brackets to move the intercooler. What you think? HOW IT DID LOOK BEFORE..... HOW IT LOOKS NOW....

I have a 99 Cobra wiht the upgraded 1/2 shafts, locker and 396 gears. The car got new wheel bearings and brakes last night in the rear. Im looking for a 99-04 GT mustang that like to road race or auto cross or is just looking for a better ride that would like to have IRS in there car. This is a...

I have a rear weel bearing that has gone out. I need to pull the hub off the car to replace the bearing in the hub or replace the hole hub. The top bolt on the hub that goes to the upper arm will not come out. I got the nut off but cant knock the bolt out. I have hit it with a BFH and tried a...

On a 99 cobra if it starts to go into a lean condition will the ecu pull timing out to keep the set a/f ratio that is in the tune loaded in the car?

I have a 99 cobra with a pro charger blower making 10psi of boost. 39bl injectors with a 90mm lighting mass air sensor. The thing is the car runs grate till 5100 rpm then it falls flat on its face droppings from 400hp at the 5100rpm mark to 250hp, but the thing is as soon as it makes the drop...