I have a 10th ann. torch red 03 cobra for sale. The car just turned over 40,000 miles. It has lots of extras including a 2.76 Billetflow non-slip upper pulley, 100mm Billetflow aux idler, Vortech ice box, Nitrous Express Wet nitrous kit ( 90 shot ), Kenne Bell BAP, SCT 4 bank chip, Battery...
My Cobra has just turned 38,000 miles without a single problem. I guess you could say the car has had a pretty hard life. It has been to the dragstrip many of times on a regular basis. I am running a 2.76 upper, mac catback and mid pipe, the car is completly set up for the track with a solid...
I have a solid axle in my car and have been a 1.54 60 ft on 28x9 ET Drags. I was wondering what kind of suspension set ups some of the others that have a solid axle were using and what 60 ft's they were running. I am running 28x9 ET Drags with X2C lowers and double adjustable UPR uppers with...
Well i took my cobra to the track on the nitrous for the first time! I had went my best of 7.28 at 92mph 2 weeks ago on blower only with only a 1.64 60 ft in the 1/8 the car has went a 1.54 60 ft. The stock clutch was slipping like hell then so i knew that i would prob only get 1 nitrous pass...
Ok here is the deal! I took my car to the track last week to try and beat my previous best since we have had alot cooler weather! I have took this car to the track many of times before and ran it. It is just a simple set up 2.80 pulley with idler, Mac cat-back, off road mid pipe, cold air, solid...
Well I took my stock pulley Cobra to the track Friday night and ran it. In the 1/8 it went 7.44 at 92 MPH with a 1.64 60ft with a slipping clutch. That was my best pass. My pevious best was a 1.60 60 ft and 7.51 at 90. I made several 7.45 and 7.47 passes. The car was yanking the left front. I...
Dial up warning, large file.
The red 03 Cobra at the end has a stock pulley, K&N filter, Mac h-pipe, Mac catback and a solid axle with 4.10 gear. 7.51 with those mods is laying it down. He now has a tubular kmember and back seat delete but hasn't ran the car since.
right click, save as...
Ok, i put a QA1 tubular k-member on my cobra. I put the factory a-arms back on it until i could get the tubular ones. The problem is now that the k-member is on my front tires stick out about 1/2 inch more than they did. Other than looking like shit it slings rocks and road debris all over the...
I have a 03 stock pullied Cobra with a Mac Cat-back, H-pipe, K&N drop in filter and solid axle with 4.10 gear! All front susp is stock and the rear is all stock gt susp including stock axles, control arms, and shocks! this car has no weight reduction. It is a 10th ann with full interior!
I...