Looking at replacing my harmonic damper
the innovatorswest damper lets you keep the stock cage. Ayone know if anyone esle makes one that can keep the stock cage in place?
does anyone make a replacement for the stock lower pulley. Or do I just replace the damper and put the stock pulley...
I have the stock ford oem clutch cable with foire firewall adjuster/quadrant. ldc free play mod. ford clutch cable modifed for firewall adjuster.
every time it breaks right at the end were it hooks on the quardrant.
I really need a fix for this, leaves me stranded way too much. want to...
I am looking into a new big/litle setup for my car. Car still has the irs but will go solid sometime down the road.
I really want weld rt-s rims for the rear. I want a setup that can can just put on with no spacers etc.
Want a setup that I can drive to the track and back, and on the...
I am looking in to a big/litle setup for my car. Car still has the irs but will go solid sometime down the road.
I really want weld rt-s rims for the rear. I want a setup that can can just put on with no spacers etc.
Want a setup that I can drive to the track and back, and on the street...
does anyone sell a kit with all the nuts and bolts to swap over to a solid rear axle?
And what is the typical cost for a built rear end and rear suspension?
What are some good parts to get the best 60ft? shocks, coils, control arms etc..
Looking for best straight line performance...
i searched to find some info and found none.
what rpm do you shift at?
looking to see how high you can spin these motors, what is safe? when does it stop making power?
factor limiter is 6.5k right?
ford cable. broke right at the tip were the small head is that holds it on the qaudrant.
setup is spec 3+ for cable, ldc mod, mico click firewall adjuster, triple hook quardrant.
cable is maybe 1 year old.
has been really hot here 100*+ every day, dunno if that has anything to do with...
can some run this vin 2ftrf07374ca56747
its a black 04 lightning 36k on it.
looking at purchasing it, as far as i can tell it has bassant exhaust, a lower pully with idlers, k&n cold air. bed cover.
thanks
i have an 03 cobra steg 4 port, 2.76 upper, catback, sct maf, tune. spec3+ clutch and flywheel 26 spline
full weight 3900# with me in it sway bar on, spare in trunk big jack toolbox etc... 17" greg weld skinnys, with m&h biasply front runners, 16" v6 pony wheels out back with 26*9.5*16...
i have some 16" v6 mustang wheels with hoosier qtp 26/9.5
i want to get a set of mt et streets 26/10.5 to replaced them. the hoosers have plenty of tread left. is it worth is to switch over , or will it hook the same? and will they fit?
another question is that i have some greg weld...
I currnetly have some 16" ponys on the rear with hoosier qtp's.ran them with stock tires up front and had bad sway
I have some 17"*4.5" greg weld front skinnys, but have yet to order front tires.
what tire and size should i run on the skinnys?
I will be getting some 15" rims after the...
so whos got the lightest 03-04 cobra?
mods?
anyone ever realy stripped one down?
looking at keeping mine stock apearing on the outside. As far as the inside everying within reason is gonna go.
just got a spec 3+ with the light pedal option installed. Along with the fiore adjuster and the 1 hook quick relese quadrant fomr lethal
the pedel sits up very high and the clutch disingagement is at the very top.
the firewall adjuster is all the way in. stock cable btw
how to i adjust...