Recent content by juskol18

Ohh you mean like this?? I guess this must be a gen 2

Yes I data-logged several times as this is supposed to be a custom tune but whoever I’m dealing with over email says they won’t chase the issue with ghost cam whatsoever, which is crazy because there disclaimers says they won’t chase driveability issues or make it chop more, it doesn’t say they...

I have a 1954 f100 that has a gen 1 coyote out of a 2014 f150 in it with the ford control pack. I recently purchased Lund racings tuning mainly for the ghost cam to get that older sound out of the truck since driveability wont be a factor. I installed the ghost cam tuning and I get nothing, I’ve...

This may be a dumb question but will any gears for a 8.8 work? According to American muscle they sell a cobra irs specific gear.

About a month ago I decided to take the terminator to town and on the way back I found a dodge charger to play around with. While I was messing with him my rear diff began to lock up. (Come to find out it was leaking fluid). So now it's time to rebuild the differential. I haven't taken it apart...

I'm in need of a KB BAP mine has went bad. Let me know what you have

So last night I cranked my car for the first Time in 2 days to just run to my buddies house right down the road. I was barely creeping along and the car started sputtering as I would give it a little throttle. Then I looked down at my a/f gauge and it was at 10.1 when it's normally around...

I'm needing a driver rear cv axle. I'm sure they are all the same but I can't find a lot of info on them. The broke axle I removed was a 31 spline on diff side and 28 spline on the wheel side.

I recently broke a irs axle at the track. I am having a very hard time finding a replacement axle. The axle I pulled out is 31 spline on the diff end and 28 spline on the outer hub end. Is this correct? Everything I see leads me to believe they should both be 31 spline? Also will a master pro...

I just left HMP with a broke car. I was able to make two passes before the passenger side rear axle gave up. The best time I had was 1/8 7.6 with a 1.71 60ft car was spinning bad on the nitro 315 555r. How do these times sound? My mods are in sig. Was running 100hp shot

I finally got a chance to take off and get the car tuned. On motor it made 480 hp to the rear wheel. And on a 100 shot of nitrous it only made 546. The tuner thought I was getting some spark blow out. Do y'all have any suggestions on why I only had so little gains when I was expecting any where...

I'm installing a NOS WOT/RPM activated window switch. Which wire do I tap into for rpm reading, and which wire on the TPS? I assume the middle wire on the TPS from what I can remember this is the signal wire. Thanks for the help

I have a chance to buy a NOS nitrous kit For a fair price. My Question is are my Mods enough? Mods are attached in the pics. Let me know what you guys think!