Recent content by Kyle Trammell

I have a friend who just got a M112. I'm mid build putting a M112 on a V6. But does anyone know anyone who sells or makes an adaptor plate for M112 for the V8? Sent from my iPhone using the svtperformance.com mobile app

only 95,000 miles on the car it came off of. stock blower.

.

Car help.... I have a 2002 V6 5 speed. I replaced the brake booster and master cylinder. The master cylinder is good. My issue isn't then brake booster. The first time it was installed, i had to actually cut the 4 bolts with a dremal because they wouldn't fit properly. Strut wall and motor...

shaft $300 RAM HDX Clutch $340 RAM Flywheel $335 high performace clutch cable $90 pilot bearing $10 throwoit bearing $60 bearing retainer $60 ....$1995

need help deciding what to buy next. car has 140k miles stock clutch kit, drive shaft and rims. clutch release is about 3/4 back. clutch does not bite down as great. have to rev a little when i take off. car has moderate vibrations in 5th gear, my reason to upgrade to aluminum drive shaft...

Does anyone have a schematic or have any idea which pin does what? I want to use the stock wire harness on the button to connect to a light, etc.

^^^ a random small 20amp fuse was blown and i just replaced it and it worked. lol

2 ideas i can think of... make sure your emergency shut off switch isnt switched or damaged. also i had a similar issue last week. it wouldnt start. and it was literally a fuse in the driver side fuse box under the steering wheel.

i am getting HDX clutch and i dont want a HDX flywheel because of the higher price. so i was thinking HDX steel clutch and Spec bullit steel flywheel. will this work???

I want my car to have a rear stance look. like my tires are sticking out maybe 1 inch. nothing too crazy.

i am doing 18's because i only found all black FR500's in all black. 17's did not have all black FR500's. whats the best read tire size out of these choices in the photo.

incase someone were to search or google about this and find this post. The V6 mustangs already have the fog light & traction control harness in the car. its connected to the block off button or fake and non usable buttons preinstalled. just pop off the plastic bezel around the shofter/gear...

one of my friends is driving my car today who has a manual as well. so ill see what he says as well. My future build will be a m112 supercharger at 10 pounds. about 300-350 hp The HDX is rated at 450 hp. so should i stick with it? amd is that flywheel okay? there are not that many reviews on...

this is the new setup i was going to go with: RAM HDX Clutch RAM billet steel flywheel (unsure tbh) Ford Racing Throwout bearing Ford Performace Roller Pilot Bearing Maximum Motorsports clutch cable