Recent content by lowblack04

There is a spacer behind the big gear I front of these, but not behind

aren’t you supposed to be looking at the dots on the gears when you put them on?

Makes sense I guess? Thanks

Was going back together with my timing set passenger fine went on and looks fine. The driver side looks off and the chain is basically touching the tensioner. What gives?

So you just roll it over till you pop all the followers out, get it Back to TDC and put all the gears and chains on, then go back through and install the followers. Or does #1TDC not matter?

Guess I could use some big vice grips lol, or just not be a cheapo. I wonder if AutoZone has a loaner for that. I wouldn’t use much else from there but.

Yeah I really don’t have the tools. If it’s necessary it is what it is I’ll have to buy the tools. Chances I’ll ever use them again is slim to none.

I just had a machine shop replace some valves and block had to be bored.020 new pistons etc. when I go back together with this thing what all do I have to do with the timing. Do I get #1 at TDC and line up everything on the dots and chains etc, or do I have to go more in depth? Thanks in advance.

Manley Ford Modular 4.6 / 5.4 Economy Forged Pistons -18cc [170700] - $549.99 : Modular Motorsports, Home of the worlds fastest Fords Can anyone tell me if these will be good replacement pistons for stock. Cylinders had to be bored .020. Thanks in advance.

This car had a cracked intercooler due to a freeze about 3 yrs ago. I replaced the intercooler and put everything back together. Then found out the fuel pumps were bad. Replaced those. Just got the tank and all back in couple days ago. Bought a new battery. Tried to start it and no go. I pulled...

Yeah mine is just side skirts. Aggravating.

Thanks. That’s what I figured.

Wondering if anyone has had a problem with this on their car. It’s only on the two rocker panel moldings. It’s deep in the paint. I’ve trued rubbing compound and all kinds of other stuff. The car has been sitting inside the garage for a couple years.

What brand is good to go back with. I’ve seen some stuff about single focus pump,but mostly looks like people are using those on 99-01. Thanks.

That’s awesome. Been tryin to find that plug pin out