There kit for that allows the use of 2015 to 2020 GT350 (R)
was my #1 choice. The only reason I chose the 2018 PP 6 pistons was they fit under the 2 sets of 19 inch wheels I have. The GT350 Calipers required aftermarket wheels.
Did the rear upgrade at the same time. 2 Track events one at WG the other at VIR , use DTC70 fronts and DTC60 on the rears. A definite improvement. For street driving you really cant tell the difference, but they do look great as the fill the wheel much nicer than the OEM size.
I did this with 2018 ; 6 piston brembos, purchased all the parts form RockAuto.com
The flex brake lines need to be changed to 2013/2014 GT500 lines.
A small amount of material bust be removed from the calipers to allow the brake lines to line up with the banjo,
2017 Ford Mustang Shelby GT350 Coupe
$51,995
White with Blue over the top racing striped
Black interior
All 2017 have Track Pack, coolers.
Navigation and Recaro Seats
Original Mature Owner
Purchased NEW February 2018
Base warranty good until 2/2021
Power Train warranty...
the 1995 Cobra R wheel 17 x9 that fits a 5 lug conversion was part # M179
Long discontinued
The 1998 Cobra wheel is 17 x8
Both fit but the 17X8 will clear much easier in the rear with out rolling the fender lip
RAYBESTOS RC4268
RAYBESTOS RC4267
these are complete rear calipers with caliper bracket
Are you looking for the bracket the caliper sit in or the bracket that bolts to the end of the axel tube?
Agreed Tom , But I was under the impression Mark was looking for something functional not "oem" besides, Copper Steel or plastic, once it painted black, it would look the same. Have you ever seen a movie set they use wood and styrofoam for everything and can paint it to look like Steel ...
Mark
What are the OD of each of the three outlets.
My thoughts are it can be fabricated from a std. copper plumbing fitting.
32874 - Elkhart 32874 - 1-1/4" x 1-1/4" x 3/4" CxCxC Reducing Tee
for the drain pet-**** drill a precise hole opposite the Bull on the T and thread this fitting in...