Recent content by SpittingCobra

  1. SpittingCobra

    Need Engine

    ~15k miles, Knoxville, TN
  2. SpittingCobra

    96 Cobra Teksid build

    If you're staying at 10psi you should bump the compression. If you smooth the chambers on the heads you're gonna gain volume to where the dish brings you even lower compression. I would do flat top at the very least.
  3. SpittingCobra

    Need Engine

    My original 97 Cobra engine. Teksid aluminum block, ARP rod bolts, ARP main studs, Manley forged h-beam rods, Manley forged pistons, stock forged crank balanced, heads were cleaned up with very light porting and a 5 angle valve job, new FRPP oil pump, etc.
  4. SpittingCobra

    Need Engine

    If you still need this and can wait until March, I'm removing my built engine and will be selling complete longblock.
  5. SpittingCobra

    Rear Brakes for Brembo Front Brake Kits?

    https://www.lethalperformance.com/maximum-motorsports-99-04-cobra-irs-racing-brake-kit-with-fixed-mount-rotor-hat.html?gclid=Cj0KCQjw7JOpBhCfARIsAL3bobcAzWEyocOvpC-IQ0PsoepsoM7aiRb1dBVYYdICzEkW-KIOAuX9ALAaAgLZEALw_wcB Won't this work for filling out the rear wheels properly? Says it's for the...
  6. SpittingCobra

    97 Cobra - optimizing suspension at stock height

    This IS stock ride height basically. The cars were basically "idiot proofed" by Ford and sent out with extra clearance because someone in some marketing department where they decide how much higher than corvettes their product needs to be in order to hit their target market.. I get why they...
  7. SpittingCobra

    Deleting Coolant Crossover

    I just removed my procharger and when I pulled my stock cross-over pipe out of storage it looked pretty crappy.. also I had a ratchet actually break off in the filler cap so when I had the pipe powdercoated I ordered the plug from MMR. This was just a few weeks ago. Very high quality piece...
  8. SpittingCobra

    Official SN 95 Pics thread!

    Looks damn good! If you use "adhesion promoter" on the plastic parts you don't have to use "plastic paint" and you will have much better results with a regular automotive base-clear.
  9. SpittingCobra

    Official SN 95 Pics thread!

    Yes! I have pictures of this car saved on my phone and computer lol!
  10. SpittingCobra

    Anyone know where to find a S281 Wing?

    There are few products on the market that have the fit and finish of the Kaenan spoiler. Mine was a perfect fit and bolted right on. They didn't even prime or block it. It's damn near perfect. There was a guy on Youtube that was sort of denigrating me for suggesting he use it over the lumpy...
  11. SpittingCobra

    What smaller issues do you guys currently have?

    Left turn signal failure inside of the switch, backup light needs replaced, AC not working, driver side mirror shaking, cd player just recently quit, there's more little stuff I'm forgetting. The problem is I often pick up other upgrades that take all my time and energy and never get around to...
  12. SpittingCobra

    95 Cobra -- Creative Ad

    That's exactly how it should be marketed.
  13. SpittingCobra

    Mach 460

    What's the most retro factory 90's looking head unit?? I really want to upgrade the stereo but hate the stupid flashing blue crap and stupid ricer looking headunits..
  14. SpittingCobra

    Cobra R Engine. Located in PA

    For some people money is no object. I agree it really makes no logical sense. The Cobra R is only special as a complete package from Ford. With the money the whole car is worth, especially with 15k miles, why not just sell the car complete and go buy a new edge and build the car exactly how...

Top