Recent content by Teej281

Ladies and gents! I have a question that some of you probably could help me with. If one were to employ an SLA front suspension from Griggs or agent 47, would one be able to trim the factory strut towers back for additional underhood room? I've seen that both these kits use their own shock...

Hey all! I used to be more well-versed with wheel sizing in regards to offsets and backspacing for these cars. But recently I've been out of the wheel game and lost most of what I used to know. I'm going to be looking around to try to get me some new wheels. The wheels in question are 18"...

Hey all! I searched and didn't find any posts about this, and I know there are a lot of F14 fans out here amongst us, so thought I would share! Forgestar just released their Super Deep barrels in 19's for the F14 line...

Hey all! At the PRI show in Florida, FRPP announced a new Aluminator XS longblock with the new CJ manifold and such thats rated at over 500hp. As well, the CJ manifold will be available within 2 weeks! PRI 2012: FRPP’s Coyote Cobra Jet Intake Manifold, New Crate Engines | StangTV Just...

Hey all, Just thought I'd share an experience with you all to prevent you guys from doing the same thing. Last year at MW, I had an unfortunate run in with the local law enforcement over a trivial matter. Down in Myrtle Beach, there is a city ordinance that states that it is illegal to race an...

Hey guys, Something that I've been quite curious about lately, as there has been a lot of interest in my community in IRS swaps into GT's, is that people keep saying that the 99/01 and 03/04 Cobra IRS designs suck and that they are terrible rear ends. Aside from the halfshaft problems that are...

Thought this looked pretty sexy! New from BBR... http://www.svtperformance.com/forums/distillery-374/792200-2011-2012-ford-mustang-gt-boss-302-need-fuel-upgrade.html They are retailing for $900 for an introductory price I guess. Just thought I would share with you guys that dont frequent...

Hey guys, Just picked up some 6cyl wheels I was planning on using for winter use, but unfortunately they will not fit over my cobra brakes in the front so I'll be using 2 of the 4 for slicks. I can post pictures if you like, and I'll sell you the best 2 out of the set. Wheels have bald all...

Hey guys, Since my other thread didnt get any attention, I figured I'd make a new one on the core subject of the old one. What is "the sway" on the big end of the track? What's it caused by? Tire construction? Width? I'd like to know just because I plan on using bias ply slicks and am...

Hey all, Had a JLT CAI on the car for about almost 4 year now. And as you're probably guessing, you are right. I havent changed or cleaned the filter since its been put on. I havent even seen the filter since it was installed. So at this point, I'm thinking that this thing might be beyond...

Hey guys, Now I know this may seem like a really retarded idea, as I think in most applications it would be. But what would you guys say to running drag radials up front while running slicks out back to help with sway at the top end of the track? I've never truly grasped the concept of the...

Hey guys! I just had a few quick questions. We'll start off with saying I have a set of the 17x8 Starfish wheels that came stock on 99-00 Mustang GT's and a set of 16x7's from an 04 V6. Now the questions start. 1. I will be using one of these setups for winter driving. One of them for drag...

Hey all, First time in here, so I apologize if I do not follow procedure for posting or anything. I was down to Mustang Week at Myrtle Beach for the whole week. And almost every night I found myself out cruising down the strip with some friends. Every night when I saw an LEO, I made sure to...

Hey all, still looking at putting a single on my GT. I know, this is a cobra section. But for tech info, there isnt much info out there for GT's. So I come here for turbo help. I'm planning on using a Precision billet ball bearing turbo, but does anyone know why its almost double the price of...

Hey guys! Going for a sleeper setup on the car with some stock 99 Starfish 17" wheels. Going to run 26x11.5x17 Bias-ply ET Streets out back and want to have the fronts narrowed to 17x4 to run a bias-ply front runner on there to save some weight. Does anyone know who to send the wheels off to to...