Recent content by torrey

New shoes on my ghetto sled

What is the proper way to remove the alternator? I bent the tabs up for the crossover tube

Radiator vented it's self, then I went to remove the fan and the resistor fell apart

I have been noticing that the driver's side rear tire wasn't spinning when I nailed it. Tore it apart and found that the spider gears were chewed up. It looks like the side gears were replaced as they are not even nicked. Keeping Ford parts in business [emoji6]

Drivers side tire wasn't spinning

Pretty happy on how the 03 did. I did notice that the driver's side tire wasn't spinning on the burnouts towards my last passes

Lone Star motor sports park in Sealy Tx had an open drag strip today. 50 bucks to run all day.

Just changed out my shift knob on my 03 Mach 1. If you pay for the ride its yours.

Just changed out my shift knob off of my 03 Mach 1. If you pay for the ride its yours.

My drivers side seat belt was not retracting. It's been this way since I bought the car last year, so I took it out and cleaned it. Wow after letting it soak in liquid dawn and hot water, it was nasty

Tracking down a P1506 and this is the pcv hose on the driver's side. I can't see this jerry rig being factory by just bending the hose at a 90 degrees.

Repainted the hood scoop

Looking for some direction in troubleshooting a loud rattle when I hit a bump in the road. I have checked the caliper clips (springs), shocks and banged around with. Rubber mallet Thanks Torrey

What's your rpm when you turn on your ac? Turned mine on and it stalled. Ac works fine when I am driving down the road. Push in the clutch and it drops down below 1k rpm around 600.

Question, I have a 03 mach 1 and when I take off the passenger rear wheel spins. What type of rear end came stock with the 03 Mach 1's?