Recent content by voodoo21

Finally got the 8pt cage installed with a couple extra bars:rockon:

So I got to attend mustang week drag night at Darlington. My first pass I launched at 2400 rpm with 18psi in the nitto 05r's and blew the tires off. 60 Foot Was 2.041, ran a [email protected]. I've got bmr lca's, 4.10s, aluminum driveshaft TVS gen 1 with supporting mods, dyno tuned by Dan at Prodyno...

Installed the gen 1 TVS back in the summer and had it tuned by pro dyno in Ft Mill SC. Made 692/678 with the stock TB, stock elbow and stock injectors. Have since upgraded to FRPP 65mm tb, L&M elbow, and 80lb Injectors. Added the Metco auxiliary pulley to help with belt slip. No headers just of...

Had to replace the battery. Is it necessary to re-install the tune just to be safe? Thanks in advance. It is a dyno tune from prodyno.

I was on my way home from work minding my business cruise set, and a silver lightning pulls up next to my drivers side and paces me. I look over and see he has pillar gauges and he gives it a little hit. I don't strike yet as there is traffic in front of us. He pulls ahead and I have to pull...

Looking for a used elbow if anyone has a spare. Gen 1 TVs. Thanks in advance

Upgraded to a TVs, so selling the stock Eaton off my 08 with a vmp 2.5 pulley. Elbow not included. $375 shipped.

Going to look at a used tvs tomorrow and want input as what to look for as far as possible problems. Asking price is 1700, just the blower.... no tb or elbow. Price is nego.

Installed 3.73's and have severe whine on decel and slight on cruise. Apparently our cars have different backlash and ring gear torque specs? I set the back lash at .014. I used the .012-.016 from the haynes manual for the rear end. Torqued the ring gear bolts to 75 ft lbs. Caps torqued to 77 ft...

Getting ready to install the 3x intercooler reservoir, and was wondering if anyone has any pjcs of the hose connection by the drivers headlight. (Outlet side?) Do i need to get a different hose, or reroute the factory one? Thanks in advance.

I dont know the MFG of this. It was on the car when I recently purchased the car. THe pulley measures roughly 2.96" so its basically a stock dia. $65 shipped. PP or USPS MO. Open to trades...looking for aftermarket shifter knob

I did the search thing but not what I was looking for. What is everyone setting their fans to? Thanks

I need to borrow a pulley puller/installer for the upper, obviously I will compensate for shipping both ways. I am in Camden,SC. I do not have many posts on here and no trader ratings as you can see. I do have a 230+ rating on ar15.com under the screen name stang1 Let me know if you are...

The wife and I were on our way home from dinner, and I see some bike moving fast in the rearview. Dont really pay it much mind, but he slows down and starts reving and lurching forward. My windows are down and he is starting to annoy my wife....she really doesn't like me playing on the street...

Reminds me of the 6 banger models